Water quality / CA / Bakersfield
City water report

Bakersfield, CA tap water quality.

At least one sampling point averaged above an EPA PFAS limit in EPA's national PFAS survey. This is a screening result, not a violation. The strongest city-index PFAS flag is PFOS, at 3.4× the screening comparison. EPA evaluates PFAS compliance using running annual averages, so FilterTier labels this a screening result rather than a violation.

Water system covered in this report
Cal Water Bakersfield
System ID CA1510003
Other utilities in this area: City of Bakersfield (CA1510031)
People served
267,881
Source water
surface water
Phone
408-367-8593

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
2.8 ppb
Below the 15 ppb action level

Period ending December 2024.

PFAS
7 detected
Screening flag

Detected examples: PFOS, PFOA, PFHxS, PFBS….

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile2.8 ppb · Below the 15 ppb action levelDecember 2024EPA Lead & Copper data
PFOSHighest single sample 14 ng/L · EPA MCL 4 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFOAHighest single sample 9.1 ng/L · EPA MCL 4 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHxSHighest single sample 7.3 ng/L · EPA MCL 10 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFBSHighest single sample 6.6 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFPeAHighest single sample 5.5 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHxAHighest single sample 4.6 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHpAHighest single sample 3.5 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
LithiumHighest reported UCMR 5 result: 14.6 µg/L · monitoring result, not presented as a violationUCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

PFAS is the main screening flag in this report. At least one sampling point averaged above the comparison level used for PFOS in EPA's national survey. EPA evaluates compliance using annual averages, so FilterTier does not call this a violation. If PFAS is your priority, favor exact-system certification and then check whether the certified flow can support your home.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Matched because this city report has a PFAS screening flag and this is the current #1 PFAS-ranked exact system with documented reduction evidence.

Trigger: PFAS screening flagCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 PFAS-ranked system. Its exact-model PFAS product specifications and flow are verified; confirm the certification evidence that matters to your goal before buying.

Trigger: PFAS screening flagExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Bakersfield, California — check which system supplies your address

Bakersfield has two different Cal Water-operated report systems, not one citywide test.

The public water-system identifier displayed in this report, CA1510003 (CWS – Bakersfield), is the California Water Service Bakersfield system. The California regulator also lists the separate City of Bakersfield Domestic Water System, CA1510031, which Cal Water operates under contract with the city. Both have their own 2025 Consumer Confidence Report (CCR). The operator name appearing on both reports does not mean their sampling tables, supply zones, lead results or PFAS monitoring can be combined or copied to all Bakersfield addresses.

CA1510003: Cal Water Bakersfield

Choose the 2025 Bakersfield System CCR for an account actually assigned to this system. Cal Water describes a local mix of groundwater, Kern River surface water and treated water purchased from Kern County Water Agency. The 2025 CCR says its samples and source-dependent detections cover this named system; lead 90th-percentile values require the table's exact sampling round, units and definition, and must not be used as a particular home's tap test.

CA1510031: City of Bakersfield Domestic Water

Cal Water has separately published the 2025 City of Bakersfield Domestic Water System CCR, explicitly identifying its partnership with the city's Water Department. It documents a source mix of groundwater wells, treated Kern River water and purchased treated water, plus 2025 infrastructure improvements. That report, not the CA1510003 table, is the proper starting point when the account and service address belong to CA1510031.

What do the separate 2025 reports establish?

Each operator report states its own 2025 compliance assessment, but that is not a verified November 2026 enforcement lookup. The city-system report includes 2020–2025 PFAS observations in source-specific tables, which must not be presented as a current delivered-water annual-average exceedance or a household test. Check the table's sample type, nondetect threshold, reporting limit, location and year; independently confirm any active violations with the California regulator. A ZIP is not reliable proof of the assigned system.

Primary California drinking-water regulator and both 2025 utility-report editions reviewed November 9, 2026. PWSIDs identify separate public systems, not a confirmed retail supplier for every street or ZIP. Exact provider-boundary polygons, latest lead 90th-percentile samples/units, PFAS regulatory running averages and current formal case status still require property-specific and original-table verification. Underlying EPA data, title/H1 and indexing controls unchanged.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Show all community matches (1 more)
Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

See the utility’s service-area map for coverage beyond this city.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Bakersfield, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198035%

Housing age does not confirm lead plumbing.

Owner-occupied homes61%

Tenure is context, not a treatment requirement.

Median rooms per home5.3

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Bakersfield, CA

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Bakersfield water.

Which water utility serves Bakersfield?

The water system covered in this report is Cal Water Bakersfield (system ID CA1510003), serving about 267,881 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Bakersfield?

The latest 90th-percentile result in this dataset is 2.8 ppb for the period ending December 2024. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

At least one sampling point averaged above the screening comparison used by FilterTier for PFOS. EPA evaluates compliance using annual averages; this city-page result is a screening flag, not a violation.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Bakersfield?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility / regulatory source

California Drinking Water Watch identifies CA1510003 as the Bakersfield California Water Service system; Cal Water publishes the current Bakersfield water-quality report.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report