Compare 21 smart leak products, ranked separately as point sensors, automatic shutoff devices and water-use monitors. Every score links to the exact model, source evidence and six scoring reasons. Prices were researched October 31–November 1, 2026.
Current new models only. Marketplace, used, refurbished and discontinued offers are excluded. Links point to manufacturer or verified direct-retailer sources. Prices are dated research observations; confirm the exact model and current stock.
Point sensors & detector kits
These detect water at the sensor or probe. They do not include an automatic main-line valve unless explicitly stated.
Triple contact pads detect water; local buzzer and automation events.
Evidence:
Manufacturer current Flood S Gen4 specifications.
Setup:
Wi-Fi 6/Matter or Zigbee firmware mode; Bluetooth provisioning. Local web interface, MQTT and URL actions supported. Matter and Zigbee modes are selectable, not simultaneous.
Maintenance:
Included CR123A battery; up to 2 years claimed depending on use/network.
Warranty:
3-year Gen4 device warranty under Shelly policy.
Keep in mind:
Checks flood state every 5 seconds. Economic and Rain modes disable the buzzer. Optional state-hold delay can add up to 60 seconds. Network/controller requirements depend on mode; no integrated valve or on-device scripting.
Price / availability:
$27.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
2-m / 6.5-ft sensing cable, extendable up to 150 m with accessories.Point sensor
Details & fit
Best for:
Local automation users and cable coverage.
Configuration:
Flood Gen4
Capacity / coverage:
2-m / 6.5-ft sensing cable, extendable up to 150 m with accessories.
How it works:
Cable detects moisture; device can trigger alerts/local automations.
Evidence:
Manufacturer current Gen4 specifications.
Setup:
Wi-Fi 6/Matter or Zigbee firmware mode; Bluetooth provisioning. Local web interface, MQTT and URL actions supported. Matter and Zigbee modes are selectable, not simultaneous.
Maintenance:
Four AA 1.5-V batteries included; maker estimates about 2 years depending on mode/network. Test cable and alarm.
Warranty:
3-year Gen4 device warranty under Shelly policy.
Keep in mind:
Checks flood state every 5 seconds. Economic and Rain modes disable the buzzer. Optional state-hold delay can add up to 60 seconds. Network/controller requirements depend on mode; no integrated valve or on-device scripting.
Price / availability:
$39.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
Top/bottom water contacts send long-range radio events to YoLink Hub.
Evidence:
Manufacturer product page and sensor/hub manuals. No independent response-time test in this research.
Setup:
YoLink radio to hub; hub required for remote alerts.
Maintenance:
Two included AAA alkaline batteries per YS7906 sensor; test wet contacts, alarms and low-temperature thresholds.
Warranty:
2 years for battery sensors; 1 year for line-powered hub under YoLink policy.
Keep in mind:
Remote alerts require internet and powered hub. Configured Control-D2D can trigger compatible local sirens/valves while both devices have power and radio contact.
Price / availability:
$72.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
Apple Home users prioritizing local operation and cable sensing.
Configuration:
Water Guard — Thread/HomeKit, 2-pack quote
Capacity / coverage:
Price covers two units. Each includes a 2-m / 6.5-ft sensing cable, extendable to 150 m with accessories.
How it works:
Moisture anywhere along the sensing cable triggers siren and HomeKit event.
Evidence:
Official product and support pages.
Setup:
Thread/Bluetooth; compatible Apple home hub needed for remote access.
Maintenance:
AC-powered; regularly test and dry cable after an event.
Warranty:
2-year warranty for purchases from an authorized Eve reseller.
Keep in mind:
Quoted price is for two units and availability is not assured. Thread/HomeKit does not imply Matter. AC outage disables each unit unless outlet has backup; remote notifications need Apple home hub.
Price / availability:
$219.90 USD. Official US store publicly displays set of two at $219.90. This is the pack total, not a single-unit quote; unit price is not inferred. Store also marks Water Guard unavailable.. Official store shows out-of-stock messaging; 2-pack displayed price is a reference quote.
Replaceable sensor battery; maker claims 3-year battery life and 5-year sensor service life. Test base and network alerts.
Warranty:
2 years for water-leak sensors; 5 years for base station under X-Sense policy.
Keep in mind:
100-dB rating belongs to the base, not every sensor. Four-sensor kit selected. Remote alerts require the base and working network; gallery can show other kit sizes.
Price / availability:
$62.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
Maintain power and sensor batteries; exercise valve and test closure.
Warranty:
YoLink policy: 1 year for mechanical/valve and line-powered products; 2 years for other battery products. Kit components differ.
Keep in mind:
Includes meter, actuator, SpeakerHub and three Sensor 4 devices. Labor/adapters excluded. Local actions depend on completed D2D pairing and powered, in-range compatible devices; this is not insurance against all water damage.
Price / availability:
$334.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
Whole-home protection with pressure/flow monitoring.
Configuration:
Flo Smart Water Monitor & Shutoff 900-001
Capacity / coverage:
¾-inch selected model
How it works:
Measures flow, pressure and temperature; scheduled tests look for small leaks.
Evidence:
Manufacturer page and model installation guide. No independent false-positive study in this research.
Setup:
Professional inline installation generally needed; Wi-Fi.
Maintenance:
AC power; test valve and maintain network.
Warranty:
1 year
Keep in mind:
Labor/fittings excluded. During internet loss, a powered unit may still close for a catastrophic leak; app control, live cloud data and alerts are unavailable. This is narrower than full connected protection. Configure routines and test the valve.
Price / availability:
$623.99 USD. Manufacturer displayed price; no coupon or subscription applied. Check stock at checkout
1-inch male NPSM ends; maker supports pipe sizes up to 1¼ in through suitable fittings.Shutoff device
Details & fit
Best for:
Whole-home monitoring and automatic prevention.
Configuration:
Protect PHYPF011 — successor to Plus
Capacity / coverage:
1-inch male NPSM ends; maker supports pipe sizes up to 1¼ in through suitable fittings.
How it works:
Analyzes pressure-wave patterns and flow behavior.
Evidence:
September 2026 Protect FAQ describes an updated design and specifications, not merely a renamed Plus. Legacy Plus offline guidance and the older SNWA study are context only; they are not exact Protect validation.
Setup:
Professional inline installation recommended. 2.4-GHz 802.11 b/g/n Wi-Fi; 4.2-ft outdoor-rated power lead.
Maintenance:
Maintain power/network; exercise and test valve.
Warranty:
2-year limited warranty from delivery. Proper installation required; labor and damage to property are not system insurance.
Keep in mind:
Protect-specific offline behavior was not established. The older Plus article limits offline protection to powered, sustained high-flow events and delivers alerts after reconnection; do not transfer this automatically. Labor/adapters extra; no measured Protect false-alarm rate.
Price / availability:
$579.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
½, ¾ or 1-inch compatible lever/butterfly ball valvesShutoff device
Details & fit
Best for:
Existing Aqara users wanting a retrofit shutoff.
Configuration:
Valve Controller T1
Capacity / coverage:
½, ¾ or 1-inch compatible lever/butterfly ball valves
How it works:
Motor turns the existing valve when automation commands closure.
Evidence:
Manufacturer fit and automation specifications.
Setup:
Aqara hub and leak sensor separately required; no pipe cutting if fit is correct.
Maintenance:
Four AA batteries; up to 2 years claimed; exercise valve.
Warranty:
12-month limited US warranty.
Keep in mind:
Actuator alone cannot detect leaks. Indoor only, no water-ingress safeguard. Verify handle geometry, torque and hub-local automation configuration; a battery actuator does not keep a mains-powered hub running.
Price / availability:
$69.99 USD. Manufacturer displayed price; no coupon or subscription applied. Available in manufacturer catalog
Meter sensor, indoor bridge and two preinstalled battery packs in 2X package.Water-use monitor
Details & fit
Best for:
Usage monitoring without a plumbing installation.
Configuration:
Flume 2X — sensor + bridge
Capacity / coverage:
Meter sensor, indoor bridge and two preinstalled battery packs in 2X package.
How it works:
Strap-on magnetic sensing reads a compatible mechanical meter.
Evidence:
Current manufacturer ordering, battery, compatibility and service articles reconciled. Exterior sensor/bridge photos represent the shared Flume hardware; 2X package adds a second battery pack.
Setup:
No pipe cutting; confirm meter compatibility first.
Maintenance:
Use approved Flume battery packs; battery life depends on radio link and conditions. 2X includes two packs; older Flume 2 included one. Recalibrate after battery changes.
Warranty:
1-year limited warranty; current support terms charge $19.99 shipping/handling for replacement units.
Keep in mind:
Meter compatibility required. No shutoff, local flood probe or groundwater detection. Remote alerts depend on bridge/network service. Partner/rebate subscriptions can differ from direct-sale terms.
Price / availability:
$269.00 USD. Current direct-order support page identifies Flume 2X at $269; not the legacy one-pack Flume 2. Core service has no monthly fee on direct purchases.. Check stock at checkout
Additional direct-retailer models — research scores
Compare within each product type and scoring group. Earlier published assessments retain their original method. New editorial research scores include evidence-confidence limits and six explained factors; they are not laboratory performance percentages.
H2Wise under-sink pressure monitor that reports water-use anomalies and possible leaks.
Evidence & limitations
This K-33603 model has no automatic shutoff valve. Do not substitute H2Wise+ specifications. Pressure-derived detection depends on plumbing and operating conditions.
Water-contact and freeze-alert sensor using Amazon Sidewalk.
Evidence & limitations
This is the current Sidewalk version; do not substitute older Ring Alarm sensor specifications. Network coverage can vary. No automatic water valve is included.
Zigbee water-contact sensor with optional extended sensing cable.
Evidence & limitations
Optional cable and hub are additional requirements. Local Zigbee automation requires a compatible functioning coordinator; a built-in siren or shutoff valve is not established.
B-hyve kit with three flood sensors and a Gen 2 Wi-Fi hub.
Evidence & limitations
This kit detects and alerts; no automatic household water-shutoff valve is included. Exact alert latency and battery life have not been independently measured.
Water-contact accessory for a SimpliSafe security system.
Evidence & limitations
Requires a compatible SimpliSafe system. Monitoring features depend on the plan; a water alert does not trigger emergency dispatch. No water-shutoff valve is included.
SkyLinkNet M-series water sensor accessory for a compatible alert system.
Evidence & limitations
This is a system accessory, not a standalone Wi-Fi detector. Confirm the exact hub and notification support before buying; no shutoff valve is included.
Research-based editorial scoring out of 100. Point sensors: sensing 25%, alerts 25%, integration 15%, setup 15%, system cost 10%, support 10%. Shutoff devices: sensing/response 30%, alerts 20%, integration 20%, setup 15%, system cost 10%, support 5%. Monitors: usage insight 25%, alerts 25%, integration 15%, setup 15%, system cost 10%, support 10%.
Each component is rated from 0–5. Raw score = sum(component rating ÷ 5 × weight). The published index is min(99, round(raw × 95 ÷ 90)), using the same calibration for every researched model in this release. The leading models score about 95; 100 is not presented as perfect performance. Scores are not contaminant-removal percentages or independent hands-on test results. Ties are ordered alphabetically.
Manufacturer claims, published performance sheets and exact-model certifications are distinguished in each review. Missing or limited evidence affects the evidence assessment. For leak protection, compare the actual installed system cost: required hubs or controllers, compatible valves or sensors, batteries, subscriptions and professional installation where applicable. A drinking-water gallons-per-day filter-replacement calculator does not apply to leak detectors, shutoff devices or water-use monitors.
New editorial research scores
Six named 0–10 factors are weighted and rounded to 100 points without an uplift. Factor anchors: 9–10 strong specific support; 7–8 documented capability with limits; 5–6 partial/basic support; 3–4 missing or conflicting evidence. The product page shows each weight, reason, source and remaining limitation. Compare only within the stated product type and scoring group. These scores do not measure accuracy, contaminant removal, safety or reliability.
FilterTier only moves a system into a finalized ranked position when the exact model has enough verified evidence for the category. Marketing claims, peak-flow numbers and component certifications are not treated as equivalent to exact-system performance.
What to know before you buy
Decide whether you need an alert, monitoring or shutoff
A point sensor detects water where it sits. A water-use monitor watches a compatible meter. An automatic shutoff system closes a valve after a supported trigger. A valve actuator alone does not establish a complete leak-detection system.
Test the entire response path
Check the exact hub, bridge, controller, network and power requirements. Confirm local alarms and behavior without internet. Test after installation and maintain batteries or backup power as documented.
Frequently asked questions
Are these hands-on test scores?
No. They are research-based editorial assessments with linked sources and component reasons. They do not imply independent laboratory or field testing.
Are the prices live?
No. They are dated offers for the stated configurations. Confirm current stock, included parts, shipping, tax and subscription terms with the seller. GBP prices remain in GBP.
Do commercial relationships affect the rankings?
FilterTier currently has no affiliate agreements. Scores follow the documented model-specific research and category rubric.
FilterTier provides independent comparison and educational information, not medical, plumbing, engineering or legal advice. Product claims, certifications, specifications, prices, warranties and availability can change; verify current details with the manufacturer and use water testing and a qualified professional when appropriate. Some outbound links may be affiliate/referral links, which may earn FilterTier compensation without changing the price you pay or the scoring methodology. Brand names, logos and product images belong to their respective owners.
Best Smart Water Leak Detectors & Shutoff Systems (2026) | FilterTierCompare 21 smart leak products, ranked separately as point sensors, automatic shutoff devices and water-use monitors.Best Smart Water Leak Detectors & Shutoff Systems