ShellySpot sensor

Shelly Flood S Gen4

94/100
FilterTier Score

A compact water-contact sensor with a local buzzer and a choice of smart-home connection modes.

Point water sensorLocal buzzerNo built-in shutoff

Research-based review · Price snapshot: Oct 31–Nov 1, 2026 · USD

How protection works

01

Water reaches the pads

Three contact pads detect water at the sensor.

02

Local alert

The buzzer sounds in enabled operating modes.

03

Connected action

Send a notification or trigger a configured automation.

Device price
$27.99
USD · one sensor, battery included
Detection coverage
One point
Place where water can reach the contacts
Automatic shutoff
No
Separate valve / automation would be needed
Claimed battery life
Up to 2 yrs
CR123A · use and network affect life

The FilterTier take

Flexible point detection at a low entry price.

Shelly combines a local alarm with Wi-Fi, Matter or Zigbee options for different setups. Its protection starts where water reaches the contact pads, and remote features depend on the selected mode and network.

A good fit for

Monitoring a specific leak-prone spot near an appliance, sink or other likely source.

Keep in mind

It does not close a water valve on its own. Economic and Rain modes disable the buzzer, and Matter and Zigbee are selectable modes rather than simultaneous operation.

Detection & response

What it detects. What happens next.

A point sensor, flow monitor and shutoff system solve different problems. The exact device and setup determine the response.

FunctionDocumented scopeEvidence
Water detectionContact sensing; flood-state polling is every 5 seconds. Optional state-hold delay can add up to 60 seconds.Maker specificationView source ↗
Local alarmBuzzer available; Economic and Rain modes disable it. Battery power is still required.Mode-dependentView source ↗
Smart-home connectionWi-Fi 6 / Matter or Zigbee firmware mode; Bluetooth provisioning. Local web, MQTT and URL actions are documented.Maker specificationView source ↗
Automatic valve closureNo integrated valve. A separate compatible actuator and configured automation are needed.Not includedView source ↗

Manufacturer current Flood S Gen4 specifications.

Before you choose

It does not close a water valve on its own. Economic and Rain modes disable the buzzer, and Matter and Zigbee are selectable modes rather than simultaneous operation.

System requirements

Count the whole setup.

The device price is only one part of the installation. Here is what the selected model needs to provide the functions described.

Operating dependency

If internet is down

The local buzzer can still alert in enabled modes while the battery works. Remote notifications depend on the selected network path.

Operating dependency

If power is lost

The sensor runs on its own battery, but routers and smart-home controllers may not. Local actions depend on the rest of that setup.

Device type
Point water-contact sensor
Power
Included CR123A battery
Size / weight
23 mm H × 77 mm diameter; 70 g with battery
Ingress rating
IP67, manufacturer claim
Direct Wi-Fi use
No separate hub required
Matter / Zigbee use
Compatible controller for the chosen mode
On-device scripting
Not supported
Battery, network & service

Included CR123A battery; up to 2 years claimed depending on use/network.. A compatible controller is needed for the selected Matter or Zigbee mode; direct Wi-Fi use does not require a separate hub.

Setup & fit

Make the detection path complete.

Wi-Fi 6/Matter or Zigbee firmware mode; Bluetooth provisioning. Local web interface, MQTT and URL actions supported. Matter and Zigbee modes are selectable, not simultaneous.

  • Place it where a leak will actually reach the contact pads.
  • Choose Wi-Fi, Matter or Zigbee deliberately; verify the controller for that mode.
  • Confirm the operating mode leaves the buzzer enabled if local sound matters.
  • Test alerts and any valve automation after installation; maintain the battery.
Warranty snapshot

Support after purchase

3-year Gen4 device warranty under Shelly policy.

Model matters

Check the configuration

Flood S Gen4. Confirm the included parts and local seller’s terms before ordering.

Common questions

Before you bring it home.

Will this automatically stop a leak?

The sensor has no valve. Automatic shutoff requires separate compatible hardware and a tested automation.

Will I hear an alarm without internet?

The local buzzer can work without internet while the battery is working and an audible mode is enabled. Economic and Rain modes disable the buzzer.

Does it run Matter and Zigbee together?

The documented firmware modes are selectable. They should not be presented as simultaneous operation.

Research trail

Sources & product imagery.

Research snapshot: October 31–November 1, 2026. Prices are captured offers, not a live checkout feed. Evidence and warranty terms are linked for review.

  1. Shelly · product / purchase page ↗ (us.shelly.com)
  2. Warranty & return terms ↗ (shelly.com)
  3. Official technical knowledge base ↗ (kb.shelly.cloud)

Official brand and product assets: