The FilterTier take
Local shutoff with a direct path from probe to valve.
The Titan’s useful distinction is its wired probe: detected water can trigger valve closure without a hub or internet. Fit and power are the major checks; remote operation adds a compatible Z-Wave controller.
Homes with a compatible accessible ball valve and a nearby location for the included leak probe.
This is a valve actuator, not a whole-home flow analyzer. It needs compatible valve geometry and power; battery backup is sold separately.
Detection & response
What it detects. What happens next.
A point sensor, flow monitor and shutoff system solve different problems. The exact device and setup determine the response.
| Function | Documented scope | Evidence |
|---|---|---|
| Local shutoff | The wired probe can trigger closure without a hub or internet connection. | Maker documentationView source ↗ |
| Remote operation | A compatible Z-Wave hub is needed for connected features. | Additional hardwareView source ↗ |
| Valve fit | For compatible ½–1¼-inch ball valves. Gate valves are excluded. | Fit-dependentView source ↗ |
| Leak analytics | No whole-home flow analytics; detection is based on the connected probe or configured automation. | Not includedView source ↗ |
Manufacturer-supported retailer technical/fit information.
This is a valve actuator, not a whole-home flow analyzer. It needs compatible valve geometry and power; battery backup is sold separately.
System requirements
Count the whole setup.
The device price is only one part of the installation. Here is what the selected model needs to provide the functions described.
If internet is down
The included probe can still trigger local valve closure without a hub. The actuator must have working power.
If mains power is lost
Do not assume closure will remain available. An optional backup battery is sold separately; check installation and testing instructions.
- System type
- Retrofit actuator on an existing ball valve
- Included probe
- 4.75-ft wired water probe
- Power
- 12V / 1A AC adapter
- Backup power
- Optional battery accessory, $49.95
- Side / wall clearance
- 3 in on each side and 1 in from wall
- Alarm / ingress
- 85 dB and IP66, maker specifications
- Remote controller
- Compatible Z-Wave hub, separate
12V/1A AC adapter; optional backup battery separate. Remote features require a separate compatible Z-Wave hub. The optional $49.95 backup battery is not included in the actuator price.
Setup & fit
Make the detection path complete.
Retrofit; Z-Wave hub for remote features.
- Confirm the shutoff is a compatible ball valve, not a gate valve.
- Measure side, wall and handle clearances and verify fit and operating torque.
- Place the wired probe where the intended leak can reach it.
- Test local closure and reopening, and decide whether backup power is needed.
Support after purchase
5 years with registration stated
Check the configuration
Titan ZAC36LR valve actuator. Confirm the included parts and local seller’s terms before ordering.
Common questions
Before you bring it home.
Does local shutoff need a hub?
The included wired probe can trigger local closure without a hub. A compatible Z-Wave hub is needed for remote features.
Does it require cutting the pipe?
It is designed to retrofit onto a compatible existing ball valve. Valve geometry, clearance and torque must be checked before installation.
Is battery backup included?
No. The researched optional battery accessory was $49.95. Include it separately if the installation needs backup power.
Research trail
Sources & product imagery.
Research snapshot: October 31–November 1, 2026. Prices are captured offers, not a live checkout feed. Evidence and warranty terms are linked for review.
- Zooz · product / purchase page ↗ (thesmartesthouse.com)
- Installation, use & replacement instructions ↗ (getzooz.com)
Official brand and product assets:



