Hardness is not estimated from location.
Stamford, CT tap water quality.
Aquarion Water Company (Stamford) met federal limits in the EPA records we checked. This report covers Aquarion Water Company (Stamford), which serves about 119,214 people using surface water; missing results are labeled rather than inferred.
Your results at a glance.
Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.
Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.
Period ending December 2025.
Detected examples: PFOA, PFPeA, PFHxA.
The results, with context.
Each row identifies the result, its data period and its source. Missing measurements are not estimated.
| Result | Finding / comparison | Date / period | Source |
|---|---|---|---|
| Health-based violations | No health-based limit-exceedance flag in these water-system records. | Since Oct. 2021 | EPA drinking-water data |
| Lead · 90th percentile | 0 ppb · Below the 15 ppb action level | December 2025 | EPA Lead & Copper data |
| PFOA | Highest single sample 4.3 ng/L · EPA MCL 4 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFPeA | Highest single sample 3.1 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFHxA | Highest single sample 3 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| Hardness | Not reported. Hardness is not estimated from location. | Not reported | A utility report or water test is needed for a measured value. |
Use the public-water result as a starting point.
Aquarion Water Company (Stamford) did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.
Add your home details.
Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.
Systems that fit this kind of water.
These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

iSpring WGB22B-PFKS PFAS + Heavy Metals
Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.
Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.
Stamford's reservoir system: dated lead samples, PFAS screening and distribution-zone caveats.
Aquarion Water's Stamford System (CT1350011) is a separate regulated drinking-water system from Aquarion's larger Eastern Fairfield County/Bridgeport system. Its 2025 report identifies Laurel and North Stamford reservoirs in Connecticut, three New York reservoirs, pipeline supply from Westport-area wells and Hemlocks Reservoir, and occasional Mianus water; more than 99.4% of average supply was reservoir water during the report period. A Stamford address or ZIP code cannot alone establish the supply blend or the service line at one home.
Lead testing is dated 2024, not a 2025 tap-level all-clear
Aquarion's 2025 report, printed page 3, labels its lead monitoring 2024 and gives the 90th percentile as ND <1 ppb, alongside an individual sample range of ND <1 to 3 ppb. The 2025 report prints Compliance: YES for that table's then-applicable lead action level of 15 ppb. This is a sampling statistic from an older monitoring round, not a measurement at a customer's tap in 2026. Confirm the household service-line material and request a tap test as needed.
2025 PFAS: a detected PFOA sample is not a system compliance average
The original report's 2025 unregulated-substances table, printed page 5, records PFOA average ND <2 ppt but a sampled range ND <2–4.3 ppt. It also records PFHxA and PFPeA screening ranges. Do not call all samples non-detect, round away a 4.3 ppt sample, or infer regulatory noncompliance from one result. The row's 16 ppt Connecticut drinking-water action level is not identical to EPA's federal PFOA MCL. Compliance depends on the applicable monitoring program and regulatory averaging rule; a UCMR5 detection alone does not settle it.
2025 disinfectant byproducts and hardness are system figures
On printed page 4, the report lists 53 ppb HAA5 and 64 ppb total trihalomethanes as the highest locational annual averages, compared with individual sample ranges reaching 66 and 87 ppb, respectively; the 2025 table marks compliance YES for these rows. An individual 87 ppb TTHM sample is not a confirmed running-average MCL violation. The 2025 hardness table shows 3 grains per gallon average, range 2–4; it is not an address-specific result.
To check pipe material, use Aquarion's address-based lead service-line inventory; an “unknown” service line is not proven lead-free. Verify which utility serves the street and check Aquarion's current alerts separately from past annual data.
- Original Aquarion 2025 Stamford System report — printed pp. 3–7
- Original utility report index, 2025 Stamford vs Eastern Fairfield
- Aquarion address-level lead service-line inventory
- Aquarion Connecticut PFAS regulatory questions
Original Aquarion 2025 Stamford PDF printed pages 3–7 visually checked November 9, 2026. No address/ZIP boundary, current EPA/CTDPH violation status, or final federal PFAS annual-average compliance decision is inferred. The EPA 2026Q2 snapshot and UCMR5 rows remain untouched.
Areas served & connected communities.
A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.
Consult the utility on your water bill for a service-area map. City limits alone cannot identify the supplier to an individual property.
What local housing can—and cannot—tell you.
Housing estimates describe Stamford, not the materials, water quality or plumbing demand of your individual home.
Housing age does not confirm lead plumbing.
Tenure is context, not a treatment requirement.
Room count does not determine peak flow.
Live air-quality map · Stamford, CT
Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.
Open the live AirNow map ↗For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.
Questions about Stamford water.
Which water utility serves Stamford?
The water system covered in this report is Aquarion Water Company (Stamford) (system ID CT1350011), serving about 119,214 people. If your bill shows another utility, use the ZIP report to confirm your system.
Was lead reported for Stamford?
The latest 90th-percentile result in this dataset is 0 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.
What does the PFAS result mean?
PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.
Do I need a whole-house filter?
Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.
Sources and update date.
EPA drinking-water database
Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.
EPA UCMR 5
National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.
About this water system
Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.
Official utility / regulatory source
EPA SDWIS federal record is used as the identity cross-check for Aquarion Water Company (Stamford).
Related water reports.
Check your ZIP code.
Find the public water systems mapped to your ZIP and choose the one on your bill.
