Lead: 2023 tap-sampling round, not a 2026 tap measurement
In Table 6 of the 2025 report, the lead 90th percentile is 2.0 parts per billion (ppb) from 2023 sampling. The same 2023 table lists a copper 90th percentile of 0.23 ppm. The utility also reports one sampled site above the then-applicable 15 ppb action level, while marking the system-level action-level violation column “No.” All three facts matter: a low percentile does not mean every tap sampled low, and one high individual result does not by itself establish a system-wide action-level exceedance. This report does not confirm a home's 2026 lead level or replace lead service-line checks.
PFAS: disclosed as unregulated monitoring, not an established compliance verdict
Table 3 of Wilmington's 2025 report labels its PFAS rows “Detection of Unregulated Contaminants.” It gives a PFOA average of 5.96 parts per trillion (ppt) across a reported 4.7–9.5 ppt range and PFOS average 2.69 ppt (range below 1.9–3.3 ppt). Those are report-table screening observations, not a result at an individual faucet or a verified current federal PFAS MCL violation. Determining regulatory compliance requires the correct sampling locations, effective rules, compliance period and applicable averaging method; current agency enforcement status was not established here.
Hardness varies by Wilmington treatment plant
The report's Table 5 shows average hardness of 136 mg/L as CaCO3 at the Brandywine Filter Plant and 154 mg/L as CaCO3 at the Porter Filter Plant, with different sample ranges. These are treatment-plant averages, not a verified measurement of a given home or a reason to assign every city ZIP the same water hardness. Check the applicable distribution area and consider an address-specific hardness test before sizing treatment.