Hardness is not estimated from location.
Jacksonville, FL tap water quality.
JEA met federal limits in the EPA records we checked. This report covers JEA, which serves about 826,664 people using groundwater; missing results are labeled rather than inferred.
Your results at a glance.
Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.
Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.
Period ending December 2023.
Detected examples: PFPeA, PFPeS.
The results, with context.
Each row identifies the result, its data period and its source. Missing measurements are not estimated.
| Result | Finding / comparison | Date / period | Source |
|---|---|---|---|
| Health-based violations | No health-based limit-exceedance flag in these water-system records. | Since Oct. 2021 | EPA drinking-water data |
| Lead · 90th percentile | 1.5 ppb · Below the 15 ppb action level | December 2023 | EPA Lead & Copper data |
| PFPeA | Highest single sample 6.8 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFPeS | Highest single sample 5.2 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| Lithium | Highest reported UCMR 5 result: 14 µg/L · monitoring result, not presented as a violation | UCMR 5 survey period | EPA UCMR 5 |
| Hardness | Not reported. Hardness is not estimated from location. | Not reported | A utility report or water test is needed for a measured value. |
Use the public-water result as a starting point.
JEA did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.
Add your home details.
Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.
Systems that fit this kind of water.
These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

iSpring WGB22B-PFKS PFAS + Heavy Metals
Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.
Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.
Jacksonville's 2025 JEA source tables and why one ZIP cannot identify your tap.
This page represents JEA's Major Grid, PWS FL2161328. JEA also operates other distinct water grids within and beyond the Jacksonville area; the utility identifies the Floridan aquifer as its core groundwater source. The municipal city name, a JEA brand name or a ZIP alone does not prove an individual address is on this particular grid. Verify the actual provider and grid against the bill or JEA before using its contaminant numbers; do not assign another JEA grid's measurements to FL2161328.
Lead 90th percentile: 1.50 ppb, sampled July 2023
JEA's 2025 annual report, Major Grid lead-and-copper table, retains the latest listed July 2023 household-tap monitoring: lead 90th percentile 1.50 ppb and 0 of 86 sampled sites above the 15 ppb action-level comparison. The report publication year is 2025 but the lead sampling date is 2023, not 2025. This is a system-level 90th percentile, not the highest individual result or a guarantee about an address. The JEA service-line inventory and testing contacts give residents property-specific next steps.
2025 byproducts: a high individual TTHM sample is not a violation
The 2025 JEA Major Grid table records TTHM 70.78 ppb as its reported compliance comparison, with an individual 82.26 ppb sample in April 2025 at a monitoring site. The report expressly says no TTHM MCL violation, because the applicable annual averages at its monitoring locations remained below the 80 ppb MCL. It separately gives HAA5 22.55 ppb, marked no violation against a 60 ppb MCL. A single sample is not a locational running annual average; these regulated disinfection byproducts are not PFAS.
Hardness varies sharply among JEA ZIPs and well plants
JEA's original water-hardness-by-ZIP table shows examples of 120 ppm in ZIP 32065 and 372 ppm in ZIP 32081, linked to well-plant mineral differences. These are utility-reported area averages, not two readings for Jacksonville as a whole, and ZIP geography can contain more than one provider or supply blend. Check the actual service plant and tap water before sizing a softener. The 2025 JEA CCR does not establish current PFAS compliance from a national UCMR survey peak: compare testing dates, sampling method, site averages and 2026 regulatory status separately.
- JEA official 2025 annual Water Quality Report — Major Grid table
- JEA original ZIP-specific water hardness table
- JEA address-specific lead service-line inventory
- JEA water supply and distinct grid service information
Original-utility source audit, November 9, 2026. The original JEA 2025 online CCR was cross-checked against indexed report text; PDF table-image verification and any subsequent errata remain outstanding. Do not treat published-year 2025 as lead-test-year 2025. Address/ZIP-to-grid, active 2026 enforcement/closure and site-specific PFAS compliance need independent validation. Original standardized EPA measurements and indexing rules remain unchanged.
Areas served & connected communities.
A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.
Communities in this utility’s mapped area
- Fruit Cove
- Nocatee
Other city reports for this utility
A shared system ID connects the reports, but does not mean every tap has identical water quality.
See the utility’s service-area map for coverage beyond this city.
Where the utility fits in the supply network.
Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.
Water supplied by
No supplier relationship was provided.
Supplies water to
- N.A.S. Jacksonville
- Sjcu-Northeast Utilities Ws
- Neighborhood Utilities (Timber Creek)
What local housing can—and cannot—tell you.
Housing estimates describe Jacksonville, not the materials, water quality or plumbing demand of your individual home.
Housing age does not confirm lead plumbing.
Tenure is context, not a treatment requirement.
Room count does not determine peak flow.
Live air-quality map · Jacksonville, FL
Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.
Open the live AirNow map ↗For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.
Questions about Jacksonville water.
Which water utility serves Jacksonville?
The water system covered in this report is JEA (system ID FL2161328), serving about 826,664 people. If your bill shows another utility, use the ZIP report to confirm your system.
Was lead reported for Jacksonville?
The latest 90th-percentile result in this dataset is 1.5 ppb for the period ending December 2023. Lead can also come from building plumbing, so utility results do not describe every tap.
What does the PFAS result mean?
PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.
Do I need a whole-house filter?
Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.
Does one utility serve every address in Jacksonville?
Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.
Sources and update date.
EPA drinking-water database
Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.
EPA UCMR 5
National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.
About this water system
Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.
Official utility / regulatory source
Official JEA 2025 report confirms JEA as Jacksonville's municipal water provider; quantitative FilterTier data remains tied to the reviewed PWSID.
Related water reports.
Check your ZIP code.
Find the public water systems mapped to your ZIP and choose the one on your bill.
