A neighborhood or ZIP does not equal one sample
BWS says each semiannual report identifies the water source serving the queried address, any treatment and measured detected contaminants. Cross-check sample location, result units, test year and detection limit when interpreting lead or PFAS. Changes in pumping and source mix can make a different address or sampling season inapplicable. Never copy another Oʻahu water system's PFAS survey result or utility lead percentile onto a homeowner's tap without confirming the relevant public system.
Hardness does not appear in the BWS semiannual CCR
BWS explicitly states that water hardness testing is not a federal or state requirement and that hardness does not appear in its semiannual water-quality reports. Its published FAQ explains hardness may vary among Oʻahu sources and pumps; the FAQ's geographic range is not a measured concentration for Honolulu generally or an individual building. Ask BWS about your source or use an actual tap test before sizing a softener. No hardness number has been invented here.
Historic notices and compliance have separate dates
Local boil-water, service-pressure or infrastructure advisories may affect specific neighborhoods on particular dates. They should not be repeated as present-day islandwide advisories without a current BWS status check. EPA UCMR 5 samples, detection-screening observations and enforceable annual-average PFAS compliance are different types of evidence; a missing result is not proof of zero contamination. Review your BWS source-specific report and current notices for the correct location.