Water quality / IN / Carmel
City water report

Carmel, IN tap water quality.

Your water provider depends on your address, not just your city. Check the utility name on your bill or use the ZIP lookup. A home served by a private well needs its own water test.

Find the records for your water system.

Start with your provider’s annual water-quality report. Lead, PFAS and hardness cannot be inferred from a city name, ZIP code or missing measurement.

Start with your provider.

Ask for the Consumer Confidence Report and confirm the public water system ID. For private wells, use a certified laboratory and your local health department’s testing guidance.

Find my provider by ZIP →

A water-system result is not a health guarantee for an individual home. Follow current utility notices and use a tap-water test for address-specific questions.

Carmel, Indiana — two different 2025 utility reports

Carmel's water depends on which provider serves your home.

Carmel Utilities publishes two distinct Consumer Confidence Reports for 2025: Carmel Water, PWSID IN5229004, and Carmel Clay–Citizens Water, PWSID IN5229024. The reports have different source-water descriptions and sampling results. A Carmel postal address or ZIP code alone cannot establish your provider. Check your water bill and the service-division map before using either system's numbers.

Carmel Water — IN5229004

The original 2025 utility report describes groundwater under the direct influence of surface water drawn from an aquifer in the Upper White River Basin; the utility reports treatment through its own wells and plants. In its 2023 lead tap-sampling round, the 90th percentile was 2.94 parts per billion (ppb), with 0 of 30 sites above the then-applicable 15 ppb action level. This is a 2023 result republished in the 2025 CCR, not a new 2025 or 2026 home measurement.

The report's 2023 UCMR/voluntary screening table lists PFOA highest detected 1.4 parts per trillion (ppt) and PFBS highest detected 2.9 ppt. These are highest reported screening detections, not a citywide average, a tap-specific test or evidence of a current PFAS compliance violation.

Carmel Clay–Citizens Water — IN5229024

The separate 2025 report describes a supply from Citizens Water, including surface-water treatment sources. Its 2025 lead table records a 4.7 ppb 90th percentile and 2 of 106 tested sites above the then-applicable 15 ppb action level in one sampling row. The table additionally has a separate green-highlighted 5-site lead row with no detection; these are distinct reported sampling groups and should not be combined or used to infer an action-level violation for the system. The report's overall violation column says “No” for these rows.

Its 2023 unregulated-monitoring table lists PFBS highest detected 3.8 ppt, PFBA 4.8 ppt, and PFPeA 5.3 ppt, with no 2025 household PFAS sample implied. The 2025 report's secondary-hardness row lists 317 ppm average for this supply; do not apply that figure to Carmel Water addresses.

How to use this report: identify the exact company and service division on your utility bill; then open the matching original PDF below. The 90th percentile summarizes a system's sampled taps, not your tap. Report year, lead sampling year, UCMR occurrence results and active enforcement status are different concepts. A detected PFAS compound is not automatically a federal maximum-contaminant-level violation. Any customer concerned about plumbing can check the utility's lead service-line inventory, which is not a substitute for tap sampling.

Both original utility PDFs (printed 2025 report, page 2 tables) and official report directory visually checked November 9, 2026. PWSIDs apply only to the named systems; neither PDF confirms a household's address-to-provider match. The 2023 PFAS tables are occurrence/screening disclosures, not evidence of November 2026 violations or regulatory compliance. Current EPA/IDEM violation IDs/status, exact ZIP/service-area joins and later monitoring still require independent validation. No federal data, score, city count, index settings or sitemap is changed by this panel.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Your address determines your provider.

Consult the utility on your water bill for a service-area map. City limits alone cannot identify the supplier to an individual property.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Carmel, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198022%

Housing age does not confirm lead plumbing.

Owner-occupied homes74%

Tenure is context, not a treatment requirement.

Median rooms per home7.7

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Carmel, IN

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Confirm your water before choosing equipment.

Choose treatment for a measured concern and the exact reduction claim. Check household flow, maintenance and installation needs. Lead from building plumbing needs separate attention.

Questions about Carmel water.

Does one utility serve every address in Carmel?

No city-level report can establish the provider for every property. Check your bill and system ID; utility service boundaries can cross city limits.

Do these records describe the water in my home?

They describe the named system and data periods. Plumbing, service lines and local conditions can affect an individual tap. A home water test answers a different question from a utility-wide report.

Can I choose a filter from a city average?

Use the exact contaminants measured at your tap, appropriate reduction evidence, and your home’s water demand. Housing age and room counts do not determine a filter or its required flow.

Sources and data dates.

Water records: EPA SDWA 2026 Q2 and UCMR 5 occurrence data. Housing: 2020–2024 ACS estimates. Service-area maps are approximate and do not guarantee coverage at an address.