Hardness is not estimated from location.
Natick, MA tap water quality.
At least one sampling point averaged above an EPA PFAS limit in EPA's national PFAS survey. This is a screening result, not a violation. The strongest city-index PFAS flag is PFOS, at 8× the screening comparison. EPA evaluates PFAS compliance using running annual averages, so FilterTier labels this a screening result rather than a violation.
Your results at a glance.
Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.
Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.
Period ending December 2025.
Detected examples: PFOS, PFOA, PFHxS, PFBS….
The results, with context.
Each row identifies the result, its data period and its source. Missing measurements are not estimated.
| Result | Finding / comparison | Date / period | Source |
|---|---|---|---|
| Health-based violations | No health-based limit-exceedance flag in these water-system records. | Since Oct. 2021 | EPA drinking-water data |
| Lead · 90th percentile | 0 ppb · Below the 15 ppb action level | December 2025 | EPA Lead & Copper data |
| PFOS | Highest single sample 37.3 ng/L · EPA MCL 4 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFOA | Highest single sample 14.3 ng/L · EPA MCL 4 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFHxS | Highest single sample 11.2 ng/L · EPA MCL 10 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFBS | Highest single sample 6.5 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFBA | Highest single sample 5 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFPeA | Highest single sample 3.5 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| Hardness | Not reported. Hardness is not estimated from location. | Not reported | A utility report or water test is needed for a measured value. |
Use the public-water result as a starting point.
PFAS is the main screening flag in this report. At least one sampling point averaged above the comparison level used for PFOS in EPA's national survey. EPA evaluates compliance using annual averages, so FilterTier does not call this a violation. If PFAS is your priority, favor exact-system certification and then check whether the certified flow can support your home.
Add your home details.
Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.
Systems that fit this kind of water.
These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Matched because this city report has a PFAS screening flag and this is the current #1 PFAS-ranked exact system with documented reduction evidence.

iSpring WGB22B-PFKS PFAS + Heavy Metals
Current #2 PFAS-ranked system. Its exact-model PFAS product specifications and flow are verified; confirm the certification evidence that matters to your goal before buying.
Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.
Natick groundwater, 2025 household lead samples and distinct PFAS monitoring.
Natick Water Division (MA3198000) reports 12 groundwater wells in five locations, including two wells in Dover, and four facilities: Springvale, Elm Bank, Morses Pond and Pine Oaks. Its 2025 report calls Springvale and Elm Bank primary facilities, with the others supplementing during high demand. Treated water mixes in Natick's distribution network; neither a ZIP code nor a citywide sample can identify the exact treatment-facility blend at a particular faucet.
2025 lead: not detected at the 90th percentile does not mean no household exposure
Natick's original 2025 Consumer Confidence Report gives the lead 90th percentile as ND (not detected) in ppb across 30 tap samples, with an individual ND–1.6 ppb range and 0 of 30 exceeding the then-applicable 15 ppb action level. The table marks no 2025 lead action-level violation. “ND” is a laboratory reporting result, not proof all taps contain zero lead. For property-level pipe evidence use Natick's service-line inventory and consider a home tap test.
PFAS6 under Massachusetts reporting is not the same as an EPA UCMR5 screen
The town's 2025 regulated PFAS6 row reports 10 ppt (range ND–16.72 ppt) against its displayed 20 ppt Massachusetts PFAS6 MCL; that report labels its 2025 row Violation: No. Separately, the town reports a 2025 UCMR5 PFBS value of 1.8 ppt (ND–3.6). The operator's PFAS6 mixture, its own compliance column and EPA unregulated single-analyte sampling are different metrics. None alone establishes the present status of each federal PFOA/PFOS MCL or a tap-specific dose.
Hardness is reported locally, not estimated from regional geography
The 2025 report's hardness result is 108 ppm as CaCO₃ (reported range 81.4–134 ppm). Its 2025 total trihalomethanes row lists 24 ppb (range 9.3–30) and a No violation marker in the original CCR. These are report-year statistics, not a reading at an address. Water quality can vary with operation, treatment and household plumbing.
Natick's official PFAS page describes the town's interconnected treatment system and provides a WaterSmart notification signup. Check current town notices, pipe material and the latest operator report instead of inferring household risk from one system average.
- Original Natick 2025 Consumer Confidence Report — test-result tables and lead/utility source sections
- Official Natick report archive
- Official Natick PFAS, source and WaterSmart guidance
- Natick lead service-line inventory
Natick's 2025 original municipal PDF test table visually checked November 9, 2026. System MA3198000 is not an address-level service confirmation; present MassDEP/EPA enforcement, individual PFAS sample location, ZIP coverage and future federal MCL compliance remain to be separately verified. Existing EPA/SDWA and UCMR5 data are not overwritten.
Areas served & connected communities.
A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.
Communities in this utility’s mapped area
Ask your provider about nearby communities and address-specific service coverage.
Other city reports for this utility
A shared system ID connects the reports, but does not mean every tap has identical water quality.
See the utility’s service-area map for coverage beyond this city.
Where the utility fits in the supply network.
Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.
Water supplied by
No supplier relationship was provided.
Supplies water to
- Wellesley
What local housing can—and cannot—tell you.
Housing estimates describe Natick, not the materials, water quality or plumbing demand of your individual home.
Housing age does not confirm lead plumbing.
Tenure is context, not a treatment requirement.
Room count does not determine peak flow.
Live air-quality map · Natick, MA
Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.
Open the live AirNow map ↗For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.
Questions about Natick water.
Which water utility serves Natick?
The water system covered in this report is Natick Water and Sewer Division (system ID MA3198000), serving about 37,006 people. If your bill shows another utility, use the ZIP report to confirm your system.
Was lead reported for Natick?
The latest 90th-percentile result in this dataset is 0 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.
What does the PFAS result mean?
At least one sampling point averaged above the screening comparison used by FilterTier for PFOS. EPA evaluates compliance using annual averages; this city-page result is a screening flag, not a violation.
Do I need a whole-house filter?
Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.
Does one utility serve every address in Natick?
Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.
Sources and update date.
EPA drinking-water database
Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.
EPA UCMR 5
National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.
About this water system
Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.
Official utility water-quality source
Related water reports.
Check your ZIP code.
Find the public water systems mapped to your ZIP and choose the one on your bill.
