Hardness is not estimated from location.
Baltimore, MD tap water quality.
City of Baltimore met federal limits in the EPA records we checked. It recorded 2 health-based limit-exceedance violations since October 2021, now resolved or archived. This report covers City of Baltimore, which serves about 1,600,000 people using surface water; missing results are labeled rather than inferred.
Your results at a glance.
Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.
Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.
Period ending December 2024.
Detected examples: PFPeA.
The results, with context.
Each row identifies the result, its data period and its source. Missing measurements are not estimated.
| Result | Finding / comparison | Date / period | Source |
|---|---|---|---|
| TTHM | Archived · 81 UG/L | January 2026 | EPA drinking-water data |
| Revised Total Coliform Rule | Resolved | September 2022 | EPA drinking-water data |
| Lead · 90th percentile | 2.7 ppb · Below the 15 ppb action level | December 2024 | EPA Lead & Copper data |
| PFPeA | Highest single sample 3 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| Hardness | Not reported. Hardness is not estimated from location. | Not reported | A utility report or water test is needed for a measured value. |
Use the public-water result as a starting point.
City of Baltimore did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.
Add your home details.
Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.
Systems that fit this kind of water.
These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

iSpring WGB22B-PFKS PFAS + Heavy Metals
Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.
Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.
Baltimore: reservoir service zones, 2024 lead testing and the original municipal report.
City of Baltimore system MD0300002 serves more than the municipality's boundaries. The provider for a specific home and the plant supplying its water are not established by its postal ZIP alone; use the account or official service-area guidance.
Liberty, Loch Raven and Prettyboy supply regional water
Baltimore DPW's original 2024 annual water-quality report identifies the Liberty, Loch Raven and Prettyboy reservoirs and treatment at the Ashburton and Montebello plants. Water is distributed across the city and adjoining jurisdictions; system-wide chemistry and the plant serving an address are distinct questions. The historic report should not be described as today's real-time water conditions.
Lead 90th percentile: 2.74 ppb in the 2024 compliance round
The municipal 2024 lead/copper table reports 2.74 parts per billion at the 90th percentile, zero samples above the then 15 ppb lead action level, and a measured tap-sample range of less than 2 to 7.09 ppb. FilterTier's separately sourced federal summary rounds this 2024 period to 2.7 ppb. These are not conflicting new tests and do not establish a result at an individual home. The city says its next routine triennial compliance round is scheduled for 2027.
PFAS data and violation reporting belong to separate programs
The 2024 municipal report has treatment-plant-specific PFAS observations and a separate UCMR5 unregulated-survey table. One plant measurement or UCMR5 detection is not a systemwide running-annual-average regulatory finding. The EPA SDWA 2026Q2 historical violation counts on this page are a different dated dataset; neither the 2024 report's compliance cells nor the old snapshot should be used to assert that no later public notice exists. The Maryland regulator lists the utility's annual reports and official PWS identity.
Primary municipal and state evidence reviewed November 8, 2026. Original EPA measurements and violations, service-area ZIP joins, index controls and household recommendations are unchanged. See official notices for any condition after the 2024 report period.
Areas served & connected communities.
A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.
Communities in this utility’s mapped area
- Arbutus
- Baltimore Highlands
- Carney
- Catonsville
- Cockeysville
- Dundalk
- Edgemere
- Essex
Show all community matches (21 more)
- Garrison
- Hampton
- Honeygo
- Lansdowne
- Lochearn
- Lutherville
- Mays Chapel
- Middle River
- Milford Mill
- Overlea
- Owings Mills
- Parkville
- Perry Hall
- Randallstown
- Reisterstown
- Rosedale
- Rossville
- Timonium
- Towson
- White Marsh
- Woodlawn
Other city reports for this utility
A shared system ID connects the reports, but does not mean every tap has identical water quality.
See the utility’s service-area map for coverage beyond this city.
Where the utility fits in the supply network.
Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.
Water supplied by
No supplier relationship was provided.
Supplies water to
- Howard County D.P.W. Distribution
- Johns Hopkins University
What local housing can—and cannot—tell you.
Housing estimates describe Baltimore, not the materials, water quality or plumbing demand of your individual home.
Housing age does not confirm lead plumbing.
Tenure is context, not a treatment requirement.
Room count does not determine peak flow.
Live air-quality map · Baltimore, MD
Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.
Open the live AirNow map ↗For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.
Questions about Baltimore water.
Which water utility serves Baltimore?
The water system covered in this report is City of Baltimore (system ID MD0300002), serving about 1,600,000 people. If your bill shows another utility, use the ZIP report to confirm your system.
Was lead reported for Baltimore?
The latest 90th-percentile result in this dataset is 2.7 ppb for the period ending December 2024. Lead can also come from building plumbing, so utility results do not describe every tap.
What does the PFAS result mean?
PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.
Do I need a whole-house filter?
Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.
Does one utility serve every address in Baltimore?
Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.
Sources and update date.
EPA drinking-water database
Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.
EPA UCMR 5
National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.
About this water system
Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.
Official utility / regulatory source
Official Baltimore DPW Water Quality Report explicitly identifies PWSID MD0300002.
Related water reports.
Check your ZIP code.
Find the public water systems mapped to your ZIP and choose the one on your bill.
