Water quality / ME / Portland
City water report

Portland, ME tap water quality.

Water-quality information for customers of Portland Water District-Greater in the Portland area. Other providers may serve some addresses: match the system to your water bill before applying its results to your home.

Portland Water District's 2026 annual report (calendar-year 2025 data) documents the Greater Portland system, PWSID ME0091300, supplied from Sebago Lake. The same report separately covers Steep Falls (PWSID ME0091302), a groundwater system serving part of Standish; Steep Falls measurements and radon information must not be assigned to Greater Portland households. Greater Portland treats Sebago Lake water with ozone, ultraviolet disinfection and a distribution disinfectant; the utility describes an exemption from conventional filtration. The report's latest stated customer-tap lead 90th percentile is 1.9 micrograms per liter (1.9 ppb) from 2023 sampling, with zero tested sites above the 15 ppb action level; the 2026 publication date is not a new 2025 lead sampling date or a result for an untested home. Under EPA's UCMR 5 survey, treated Greater Portland water was tested on March 13, June 11, September 3 and December 10, 2024 for 29 PFAS compounds and lithium; the utility reports none detected at the applicable test/reporting limits. This is a detection/survey statement, not an assertion of absolute zero PFAS at each home or a running-annual regulatory compliance determination. The utility's 2025 mineral-content table reports hardness of 7.2 mg/L as CaCO3; an absent EPA hardness field elsewhere on this page does not negate that separately sourced utility measurement. PWD reports its 2025 distributed water met state and federal requirements, but this annual summary is not an independently verified current violation-closure record. Verify the actual service provider and any current utility alerts for the property. Sources: Portland Water District 2026 original annual report, pp. 1, 3–7; PWD official water-quality report index.

Water system covered in this report
Portland Water District-Greater
System ID ME0091300
People served systemwide
135,068
Source water
surface water
Utility phone
207-523-5260

Public water records, at a glance.

These records describe the named water system and the listed data periods. They are not a new test of your tap and do not establish current conditions at every address.

Health-based records · since Oct. 2021
0
Historical records

Record counts are not a count of contaminants at your tap.

Lead · 90th percentile
1.9 ppb
December 2023

A systemwide sampling result does not establish the lead level in your own plumbing.

PFAS · EPA UCMR 5
Survey records available
See sampling context below

Missing survey data does not establish that PFAS is absent.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

Public water-system records — ME0091300
ResultValue and contextPeriodSource
Health-based records0 historical records. Historical counts do not establish today’s compliance status.Since October 2021EPA SDWA, 2026 Q2
Lead1.9 ppb · 90th percentileDecember 2023EPA lead records
PFAS detectionsNo detected compounds listed in these survey records; detection limits still apply.UCMR 5 surveyEPA occurrence data
PFAS screening comparisonPFOS: 0 ng/L sampling-point average; 0× the screening comparison.
This is not a single-sample maximum or a running annual compliance average. A zero does not establish absolute absence.
UCMR 5 surveyEPA occurrence data
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.

A water-system result is not a health guarantee for an individual home. Follow current utility notices and use a tap-water test for address-specific questions.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Show all community matches (6 more)
Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Portland, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198076%

Housing age does not confirm lead plumbing.

Owner-occupied homes47%

Tenure is context, not a treatment requirement.

Median rooms per home4.9

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Portland, ME

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Confirm your water before choosing equipment.

Choose treatment for a measured concern and the exact reduction claim. Check household flow, maintenance and installation needs. Lead from building plumbing needs separate attention.

Questions about Portland water.

Does one utility serve every address in Portland?

No city-level report can establish the provider for every property. Check your bill and system ID; utility service boundaries can cross city limits.

Do these records describe the water in my home?

They describe the named system and data periods. Plumbing, service lines and local conditions can affect an individual tap. A home water test answers a different question from a utility-wide report.

Can I choose a filter from a city average?

Use the exact contaminants measured at your tap, appropriate reduction evidence, and your home’s water demand. Housing age and room counts do not determine a filter or its required flow.

Sources and data dates.

Water records: EPA SDWA 2026 Q2 and UCMR 5 occurrence data. Housing: 2020–2024 ACS estimates. Service-area maps are approximate and do not guarantee coverage at an address.