Water quality / NC / Charlotte
City water report

Charlotte, NC tap water quality.

Charlotte Water met federal limits in the EPA records we checked. This report covers Charlotte Water, which serves about 1,163,701 people using surface water; missing results are labeled rather than inferred.

Water system covered in this report
Charlotte Water
System ID NC0160010
People served
1,163,701
Source water
surface water
Phone
704-336-7600

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
0 ppb
Below the 15 ppb action level

Period ending December 2025.

PFAS
2 detected
Tested; no sampling-point-average screening flag

Detected examples: PFBA, PFPeA.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile0 ppb · Below the 15 ppb action levelDecember 2025EPA Lead & Copper data
PFBAHighest single sample 9.7 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFPeAHighest single sample 3.4 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

Charlotte Water did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

Trigger: Municipal-water profileCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.

Trigger: Municipal-water profileExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Charlotte Water original 2025 utility data with dated monitoring context

Charlotte Water: original 2025 lead, PFAS and hardness results explained.

This report covers Charlotte Water, NC0160010, which the city's 2025 Consumer Confidence Report labels 01-60-010. The utility draws water from Mountain Island Lake and Lake Norman in the Catawba basin, through the Franklin, Dukes and Vest treatment plants. These citywide results also inform other places that use Charlotte Water but are not separate measured results for each neighborhood.

2025 lead: 90th percentile ND, but one sampled site was above 15 ppb

The utility's 2025 tap-sampling table on printed page 5 reports ND (not detected) as the lead 90th percentile in ppb, while one site exceeded the then-applicable 15 ppb action-level concentration and the observed sample range was ND–44 ppb. Those observations are compatible: a 90th-percentile summary does not mean no individual tap exceeded 15 ppb. The utility also states zero drinking-water violations during calendar 2025 on printed page 4; a sampled site exceeding 15 ppb is not itself a utility-wide Lead and Copper Rule action-level exceedance. The federal standardized grid above displays 0 ppb for a period ending December 2025; do not interpret that encoding as a quantified zero at every tap or overwrite it with an invented detection threshold. Check service-line material and request testing at your own address.

2025 municipal total hardness: 32 ppm average

Printed page 8 of the municipal report lists total hardness as CaCO3 averaging 32 mg/L (ppm), with a 27–35 mg/L range at entry points to the distribution system. It separately lists calcium hardness at 25 ppm average; the two are not interchangeable. These are 2025 measured utility figures, not a measured reading at a Davidson or Charlotte home. The federal main summary above says “Not reported” because that original EPA dataset lacks an equivalent hardness field; this sourced secondary measurement supplements rather than replaces it.

PFAS occurrence survey and current compliance are different questions

For August/November 2023 and February/May 2024 UCMR 5 sampling, printed page 7 reports PFBA 0.75 ppt average, ND–9.7 ppt range and PFPeA 0.67 ppt average, ND–3.4 ppt range. These are historical unregulated occurrence survey values, not a 2026 running-annual-average legal PFAS compliance finding or measurements at individual taps. The utility's 2025 report records zero violations for that calendar year, which is a dated utility statement and not independently verified current enforcement clearance. The PDF also gives 2025 TTHM highest locational running annual average 63.7 ppb and HAA5 22.9 ppb, both listed with no violation for that period; these are not PFAS measurements.

AZ1 original-source audit, November 8, 2026: visually verified Charlotte Water 2025 CCR printed pp. 2, 4–5, 6–8 and the Town of Davidson's actual utility listings. Shared PWSID and approximate ZIP maps are not address-level proof of supplier or equivalent tap samples. Regulatory enforcement status after the 2025 CCR and 2026Q2 snapshot, exact lead laboratory detection limit, full PFAS running annual averages, and street/provider matching remain open. Original federal lead/PFAS records, title/H1, index directives, canonical, ZIP joins and sitemap are untouched.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Reported suppliers

Water supplied by

No supplier relationship was provided.

Utility in this reportCharlotte WaterNC0160010
Reported recipients

Supplies water to

Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Charlotte, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198028%

Housing age does not confirm lead plumbing.

Owner-occupied homes51%

Tenure is context, not a treatment requirement.

Median rooms per home5.2

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Charlotte, NC

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Charlotte water.

Which water utility serves Charlotte?

The water system covered in this report is Charlotte Water (system ID NC0160010), serving about 1,163,701 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Charlotte?

The latest 90th-percentile result in this dataset is 0 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Charlotte?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility water-quality source

Charlotte Water publishes its 2025 Drinking Water Quality Report.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report