Water quality / NC / Durham
City water report

Durham, NC tap water quality.

At least one sampling point averaged above an EPA PFAS limit in EPA's national PFAS survey. This is a screening result, not a violation. The strongest city-index PFAS flag is PFOS, at 1.3× the screening comparison. EPA evaluates PFAS compliance using running annual averages, so FilterTier labels this a screening result rather than a violation.

Water system covered in this report
City of Durham
System ID NC0332010
People served
333,490
Source water
surface water
Phone
919-560-4381

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
0 ppb
Below the 15 ppb action level

Period ending December 2025.

PFAS
4 detected
Screening flag

Detected examples: PFBS, PFOS, PFBA, PFOA.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile0 ppb · Below the 15 ppb action levelDecember 2025EPA Lead & Copper data
PFBSHighest single sample 6.5 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFOSHighest single sample 5.8 ng/L · EPA MCL 4 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFBAHighest single sample 5.2 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFOAHighest single sample 4.1 ng/L · EPA MCL 4 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

PFAS is the main screening flag in this report. At least one sampling point averaged above the comparison level used for PFOS in EPA's national survey. EPA evaluates compliance using annual averages, so FilterTier does not call this a violation. If PFAS is your priority, favor exact-system certification and then check whether the certified flow can support your home.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Matched because this city report has a PFAS screening flag and this is the current #1 PFAS-ranked exact system with documented reduction evidence.

Trigger: PFAS screening flagCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 PFAS-ranked system. Its exact-model PFAS product specifications and flow are verified; confirm the certification evidence that matters to your goal before buying.

Trigger: PFAS screening flagExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Durham Water — original 2025 report, dated results and separate Cary wholesale supply

Durham's 2025 PFAS sampling, lead measurements and source-water relationships.

The City of Durham municipal PWS NC0332010 draws its regular surface supply from Lake Michie and Little River Reservoir and operates the Brown and Williams treatment plants. The city's original 2025 CCR, printed page 4, additionally says Durham purchased water from the Town of Cary (PWS NC0392020) during 2025. This historical wholesale relationship does not mean all Durham customers received a uniform Cary blend. Verify the retail utility for a given address and do not copy Cary's individual sampling results into Durham's system data.

Lead sampled June–September 2025: 90th percentile non-detect

Durham's 2025 CCR, printed page 6, states a non-detect lead 90th percentile in ppb, 0 tap samples above the 15 ppb action level and an observed sample range of less than 3 to 3 ppb. The table does not establish that every faucet had zero lead, and it does not provide a tested concentration for any specific home. The separate EPA encoding of 0 ppb should not be converted into a zero household exposure claim. Durham lists a customer lead-test contact and a service-line inventory, which require property-specific review.

2025 Durham utility PFAS: four quarterly samples, distinct from UCMR 5

The original 2025 CCR, printed page 9, lists sampling on February 11, May 19, August 12 and November 10, 2025. It gives PFOA 3.8 ppt average (2.8–5.7), PFOS 5.6 ppt average (4.6–7.2), PFBS 5.9 ppt average (3.1–7.7) and PFBA 2.2 ppt average (2.0–3.5). These were presented under the utility's unregulated contaminant section for the 2025 report. A 5.6 ppt PFOS average is above the 4 ppt MCL numeric benchmark, but cannot by itself establish a presently actionable violation: legal PFAS assessment requires applicable compliance dates, sampling points, averaging methodology and current state enforcement. This is not the older EPA UCMR 5 survey or a house tap test.

2025 report states no violations for periods ending in 2025

Durham's 2025 report, printed page 4, says it received no violations for calendar 2025 or compliance periods ending in 2025; that does not prove an identical status in November 2026. The 2025 regulated byproduct table separately lists TTHM highest LRAA 56 ppb and HAA5 highest LRAA 49 ppb (printed page 6), both marked no MCL violation. Their printed highest LRAA can differ from the range of individual samples because these are different statistics. Durham's 2025 CCR provides no total hardness value on the reviewed table; do not invent one or copy a regional estimate.

BA1 original-source audit, November 9, 2026. Durham's 2025 municipal PDF was visually inspected. Current utility-address/provider boundary, year-to-year wholesale blends, precise lead ND analytical threshold, site-specific PFAS compliance annual averages, latest state violation closure records, and any property-level tests require separate verification. Original national EPA records, ZIP joins, title/H1, canonical metadata, indexing directives and sitemap remain unchanged.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

See the utility’s service-area map for coverage beyond this city.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Utility in this reportCity of DurhamNC0332010
Reported recipients

Supplies water to

Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Durham, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198030%

Housing age does not confirm lead plumbing.

Owner-occupied homes52%

Tenure is context, not a treatment requirement.

Median rooms per home5.2

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Durham, NC

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Durham water.

Which water utility serves Durham?

The water system covered in this report is City of Durham (system ID NC0332010), serving about 333,490 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Durham?

The latest 90th-percentile result in this dataset is 0 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

At least one sampling point averaged above the screening comparison used by FilterTier for PFOS. EPA evaluates compliance using annual averages; this city-page result is a screening flag, not a violation.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Durham?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility / regulatory source

Official City of Durham publishes its current annual Water Quality Report; reviewed North Carolina/EPA PWSID NC0332010 is retained.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report