Water quality / NJ / Ridgewood
City water report

Ridgewood, NJ tap water quality.

At least one sampling point averaged above an EPA PFAS limit in EPA's national PFAS survey. This is a screening result, not a violation. The strongest city-index PFAS flag is PFOA, at 7.7× the screening comparison. EPA evaluates PFAS compliance using running annual averages, so FilterTier labels this a screening result rather than a violation.

Water system covered in this report
Ridgewood Water
System ID NJ0251001
People served
61,700
Source water
surface water
Phone
201-670-5521

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
2.6 ppb
Below the 15 ppb action level

Period ending June 2026.

PFAS
9 detected
Screening flag

Detected examples: PFOA, PFPeA, PFHxA, PFOS….

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile2.6 ppb · Below the 15 ppb action levelJune 2026EPA Lead & Copper data
PFOAHighest single sample 31.4 ng/L · EPA MCL 4 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFPeAHighest single sample 26.7 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHxAHighest single sample 16.3 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFOSHighest single sample 13.8 ng/L · EPA MCL 4 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFBAHighest single sample 10.7 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFBSHighest single sample 8.6 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHpAHighest single sample 7.2 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHxSHighest single sample 4.9 ng/L · EPA MCL 10 ng/L
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
PFHpSHighest single sample 3 ng/L · No individual federal MCL shown for this compound
Single-sample values are context only; EPA PFAS compliance is based on running annual averages.
UCMR 5 survey periodEPA UCMR 5
LithiumHighest reported UCMR 5 result: 11.9 µg/L · monitoring result, not presented as a violationUCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

PFAS is the main screening flag in this report. At least one sampling point averaged above the comparison level used for PFOA in EPA's national survey. EPA evaluates compliance using annual averages, so FilterTier does not call this a violation. If PFAS is your priority, favor exact-system certification and then check whether the certified flow can support your home.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Matched because this city report has a PFAS screening flag and this is the current #1 PFAS-ranked exact system with documented reduction evidence.

Trigger: PFAS screening flagCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 PFAS-ranked system. Its exact-model PFAS product specifications and flow are verified; confirm the certification evidence that matters to your goal before buying.

Trigger: PFAS screening flagExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Official local sources

Ridgewood Water: NJ-regulated PFAS results, local supply and service lines.

Use these city-specific sources to choose the right provider and report. Municipal service boundaries can differ from city limits and ZIP codes.

2025 regulated PFAS results are not UCMR 5 screening

Ridgewood Water’s 2026 annual report (reporting 2025 water-quality data) lists PFOA at 34.9 parts per trillion (ppt) and PFOS at 17.2 ppt as its highest reported running annual averages, both marked as New Jersey maximum-contaminant-level violations. The applicable New Jersey limits in that report are 14 ppt for PFOA and 13 ppt for PFOS. These are dated regulated results, not an individual home test or a claim about November 2026 treated water. The separate EPA UCMR 5 survey numbers and FilterTier’s limited federal violation-record count cover different measurements and definitions; a federal count of zero does not negate a documented state violation. Check Ridgewood Water’s more recent quarterly notices for subsequent changes in treatment and regulatory status.

Water source, hardness and lead have their own dates

The 2026 report describes a mainly groundwater-well system serving multiple communities and also identifies purchased-water relationships. It reports a 2025 hardness range of 223–433 milligrams per liter as calcium carbonate; that range is not the hardness of every Ridgewood tap. Its 2025 lead 90th percentile is reported as 3.91 ppb, with none of 67 samples exceeding the historical 15 ppb action level. FilterTier’s separate June 2026 EPA lead summary refers to a different period and must not be silently replaced with this older annual-report value. Lead may also enter water through an individual service line or home plumbing.

Customer contacts and current notices

Ridgewood Water lists 201-670-5520 for its customer-service and water-emergency contact. Use the official address-level service-line lookup when evaluating your property, and the latest utility notices rather than a static national-data snapshot to check an active regulatory or construction update. A Ridgewood street address alone does not establish which well or treatment facility supplied a specific tap.

Official sources checked . This is provider and report guidance, not a new water test or a current compliance determination. Lead results require their sampling period and units; PFAS screening observations are not the same as regulatory compliance results.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Utility in this reportRidgewood WaterNJ0251001
Reported recipients

Supplies water to

No recipient relationship was provided.

Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Ridgewood, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198089%

Housing age does not confirm lead plumbing.

Owner-occupied homes83%

Tenure is context, not a treatment requirement.

Median rooms per home7.3

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Ridgewood, NJ

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Ridgewood water.

Which water utility serves Ridgewood?

The water system covered in this report is Ridgewood Water (system ID NJ0251001), serving about 61,700 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Ridgewood?

The latest 90th-percentile result in this dataset is 2.6 ppb for the period ending June 2026. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

At least one sampling point averaged above the screening comparison used by FilterTier for PFOA. EPA evaluates compliance using annual averages; this city-page result is a screening flag, not a violation.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Ridgewood?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility water-quality source

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report