Water quality / NJ / Ringwood
City water report

Ringwood, NJ tap water quality.

Your water provider depends on your address, not just your city. Check the utility name on your bill or use the ZIP lookup. A home served by a private well needs its own water test.

Find the records for your water system.

Start with your provider’s annual water-quality report. Lead, PFAS and hardness cannot be inferred from a city name, ZIP code or missing measurement.

Start with your provider.

Ask for the Consumer Confidence Report and confirm the public water system ID. For private wells, use a certified laboratory and your local health department’s testing guidance.

Find my provider by ZIP →

A water-system result is not a health guarantee for an individual home. Follow current utility notices and use a tap-water test for address-specific questions.

Ringwood, New Jersey — June 2026 official CCR with 2025 sample results

Ringwood's 2025 lead samples include one high tap, despite a zero 90th percentile.

The Borough's latest original 2026 Water Quality Report (2025 Data), published in June 2026, identifies Ringwood Water Department, NJ1611002. It documents municipal-system results and separately lists its purchased supplier. A utility-wide 90th percentile or system-level violation label cannot describe each household tap. Confirm the provider and PWSID on your bill; private-well properties need individual water testing.

2025 lead: 0 ppb at reported percentile precision, but one high sample

Ringwood's 2025 lead 90th percentile is printed as 0 µg/L (0 ppb at the reported precision). Crucially, the same original table identifies 1 of 46 sampled sites above the then-used 15 ppb lead action level, with a reported non-detect to 36.4 ppb sample range. Its system action-level violation column is nevertheless N. A zero percentile is not proof of no lead at every tested home; it summarizes the overall distribution. 2025 copper 90th percentile was 0.0981 ppm, with 0 of 46 sites above the 1.3 ppm copper action level. These are 2025 sampling records in a 2026 publication, not 2026 household test results.

2025 NJ-regulated PFAS results are distinct from EPA UCMR5 screening

The Borough's 2025 Ringwood system regulated table shows PFOA 11.5 ppt (range 3.61–14.5 ppt) and PFOS 8.97 ppt (range 3.99–9.79 ppt); both original rows mark N in the report's state violation column compared with displayed NJ MCLs 14 and 13 ppt. A high individual result within a range and the utility's compliance metric are different concepts. These state-regulated 2025 numbers are not the EPA UCMR5 emerging-contaminant one-time screening table, a 2026 current enforcement check, a federal PFAS compliance determination, or an address-level tap result.

Four groundwater wells and a separate purchased-water source

The utility reports approximately 80% of supply drawn from its four municipal groundwater wells and 20% purchased from Passaic Valley Water Commission (PVWC), ultimately related to Wanaque Reservoir source water. Its tables keep Ringwood results in a separate column from PVWC and other wholesale suppliers. A ZIP code does not establish the actual water blend at a property.

2025 monitoring and notice issues are not a new PFAS or lead action-level violation

The 2026 CCR separately describes late or missing monitoring reports for January–June 2025; a June 23–30, 2025 total-coliform assessment submitted late; a June 9–16, 2025 notice about two out-of-service wells submitted late; and participant lead-sampling notices/certification submitted late for the July–December 2025 period. The Borough says notification is bringing these matters back into compliance, but a current NJDEP enforcement-case record has not been independently reconciled. Filing/notification issues do not by themselves prove a household contaminant exceedance.

June 2026 original CCR pages 1, 3, 7–8 and 11 visually verified November 10, 2026; the newer report supersedes the historical 2024 values for this source panel. Complete independent 2026 NJDEP enforcement status, address/ZIP-to-provider mapping, any post-2025 lead results and UCMR5-versus-state PFAS sample matching remain open before full scientific acceptance. No utility-wide mean or percentile guarantees any one home's water quality.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Your address determines your provider.

Consult the utility on your water bill for a service-area map. City limits alone cannot identify the supplier to an individual property.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Ringwood, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198084%

Housing age does not confirm lead plumbing.

Owner-occupied homes96%

Tenure is context, not a treatment requirement.

Median rooms per home7

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Ringwood, NJ

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Confirm your water before choosing equipment.

Choose treatment for a measured concern and the exact reduction claim. Check household flow, maintenance and installation needs. Lead from building plumbing needs separate attention.

Questions about Ringwood water.

Does one utility serve every address in Ringwood?

No city-level report can establish the provider for every property. Check your bill and system ID; utility service boundaries can cross city limits.

Do these records describe the water in my home?

They describe the named system and data periods. Plumbing, service lines and local conditions can affect an individual tap. A home water test answers a different question from a utility-wide report.

Can I choose a filter from a city average?

Use the exact contaminants measured at your tap, appropriate reduction evidence, and your home’s water demand. Housing age and room counts do not determine a filter or its required flow.

Sources and data dates.

Water records: EPA SDWA 2026 Q2 and UCMR 5 occurrence data. Housing: 2020–2024 ACS estimates. Service-area maps are approximate and do not guarantee coverage at an address.