Water quality / NM / Albuquerque
City water report

Albuquerque, NM tap water quality.

Albuquerque Water System met federal limits in the EPA records we checked. This report covers Albuquerque Water System, which serves about 560,326 people using surface water; missing results are labeled rather than inferred.

Water system covered in this report
Albuquerque Water System
System ID NM3510701
People served
560,326
Source water
surface water
Phone
505-289-3382

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
0 ppb
Below the 15 ppb action level

Period ending December 2024.

PFAS
Tested
Tested; no sampling-point-average screening flag

No detected PFAS rows in the UCMR 5 records for this system.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile0 ppb · Below the 15 ppb action levelDecember 2024EPA Lead & Copper data
PFASNo detected PFAS rows in these system records.UCMR 5 survey periodEPA UCMR 5
LithiumHighest reported UCMR 5 result: 71.4 µg/L · monitoring result, not presented as a violationUCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

Albuquerque Water System did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

Trigger: Municipal-water profileCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.

Trigger: Municipal-water profileExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Albuquerque — Water Authority's 2025 annual report: distinct test cohorts

Albuquerque water: San Juan-Chama supply, 2024 compliance lead and 2025 customer-requested samples.

The Albuquerque Bernalillo County Water Utility Authority operates the Albuquerque Water System NM3510701. The authority's wider service area includes parts of Bernalillo County; a city's ZIP does not prove the provider for a particular address.

0 ppb in 2024 compliance sampling is not 1.4 ppb in 2025 requested testing

The official 2025 annual Water Quality Report prints its 2024 compliance lead 90th percentile as zero ppb, with 3 ppb maximum detected and zero samples exceeding the historical 15 ppb action level in that regulatory cohort. A different section covers 65 customer-requested 2025 lead samples with 1.4 ppb 90th percentile and 14.5 ppb maximum. Those voluntary samples are not a replacement for the 2024 compliance record; zero in the compliance table is not a claim every household tap is lead-free. The utility offers a separate request process for home lead testing.

2024–2025 UCMR5 PFAS: below listed reporting levels, not guaranteed zero

The 2025 municipal report prints its 2024–2025 UCMR 5 PFAS table with entries labeled zero ppt, alongside compound-specific minimum reporting levels such as 1.8 ppt for PFOA and 1.7 ppt for PFOS. Those values should be interpreted as not reported above the stated monitoring thresholds, not proof that every PFAS molecule is absent. The unregulated screening program does not itself certify property-specific or later federal PFAS compliance, and lithium is a separately reported, non-PFAS analyte.

San Juan-Chama surface water and Santa Fe Group groundwater

The Water Authority explains that the area uses both San Juan-Chama Project surface water and Santa Fe Group Aquifer groundwater. The 2025 report also provides distribution-zone and plant-specific results. A single citywide claim about exact arsenic concentration, source mix, or home plumbing would erase important differences between locations; the report's 2025 arsenic compliance data are not a present-day household test. Consult the utility's district/zone-specific resources and current notices before interpreting a given address.

Municipal PDF pages visually checked November 8, 2026. The source's 2024 compliance round, 2025 request-only taps and 2024–2025 PFAS monitoring must remain separate. No EPA/PWS/ZIP measurement rows, violation counts, sitemap or indexing controls were changed.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

See the utility’s service-area map for coverage beyond this city.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Reported suppliers

Water supplied by

No supplier relationship was provided.

Utility in this reportAlbuquerque Water SystemNM3510701
Reported recipients

Supplies water to

Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Albuquerque, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198047%

Housing age does not confirm lead plumbing.

Owner-occupied homes62%

Tenure is context, not a treatment requirement.

Median rooms per home5.3

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Albuquerque, NM

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Albuquerque water.

Which water utility serves Albuquerque?

The water system covered in this report is Albuquerque Water System (system ID NM3510701), serving about 560,326 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Albuquerque?

The latest 90th-percentile result in this dataset is 0 ppb for the period ending December 2024. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Albuquerque?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility / regulatory source

EPA SDWIS identifies NM3510701 as ALBUQUERQUE WATER SYSTEM, local government, surface water, serving 560,326.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report