Water quality / OR / Portland
City water report

Portland, OR tap water quality.

Portland Water Bureau met federal limits in the EPA records we checked. This report covers Portland Water Bureau, which serves about 666,200 people using surface water; missing results are labeled rather than inferred.

Water system covered in this report
Portland Water Bureau
System ID OR4100657
People served
666,200
Source water
surface water
Phone
503-823-1251

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
4.9 ppb
Below the 15 ppb action level

Period ending December 2025.

PFAS
Tested
Tested; no sampling-point-average screening flag

No detected PFAS rows in the UCMR 5 records for this system.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile4.9 ppb · Below the 15 ppb action levelDecember 2025EPA Lead & Copper data
PFASNo detected PFAS rows in these system records.UCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

Portland Water Bureau did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

Trigger: Municipal-water profileCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.

Trigger: Municipal-water profileExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Local utility evidence and reporting context

Portland Water Bureau: 2026 water-quality report, two source types and dated lead results.

These details come from public utility reports, not original testing by FilterTier. Verify your billed provider and the report’s sampling period before applying a systemwide result to a home.

Portland’s 2025 90th-percentile lead result was 4.9 ppb

The Portland Water Bureau’s 2026 Drinking Water Quality Report presents results for 2025. Lead measured 4.9 parts per billion at the 90th percentile among 98 high-risk home taps, with zero of those samples exceeding the 15 ppb action-level comparison used for that period. The figure is a utility sampling statistic, not the concentration at every Portland address. It agrees with the federal-index figure displayed here, but lead from older household plumbing can vary between taps. Portland offers household lead-testing kits and reports no known lead service lines based on its 2024 inventory; that is not a guarantee that a home has no lead-containing plumbing.

Bull Run and Columbia South Shore are different sources with different hardness

Portland draws primarily from the protected Bull Run surface-water system and supplements or temporarily replaces it with Columbia South Shore Well Field groundwater during some summer, maintenance or emergency conditions. The utility reports typical Bull Run hardness of 7–11 ppm and groundwater hardness around 80 ppm, so a single permanent citywide hardness value would mislead residents. Portland says its water-source PFAS sampling has not detected tested PFAS; nondetection is bounded by sample dates, compound coverage and laboratory reporting limits, and is not a measured concentration of zero or a household result. Portland’s Bull Run filtration project is planned for completion by 2029, not already in operation.

Official utility sources reviewed November 8, 2026. Original EPA laboratory records, dates, city/PWS/ZIP mappings, ratings, violation flags and SEO indexability are unchanged.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Ask your provider about nearby communities and address-specific service coverage.

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

See the utility’s service-area map for coverage beyond this city.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Reported suppliers

Water supplied by

No supplier relationship was provided.

Utility in this reportPortland Water BureauOR4100657
Reported recipients

Supplies water to

Show all reported recipients (4 more)
Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Portland, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198063%

Housing age does not confirm lead plumbing.

Owner-occupied homes52%

Tenure is context, not a treatment requirement.

Median rooms per home4.7

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Portland, OR

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Portland water.

Which water utility serves Portland?

The water system covered in this report is Portland Water Bureau (system ID OR4100657), serving about 666,200 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Portland?

The latest 90th-percentile result in this dataset is 4.9 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Portland?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility / regulatory source

Official Portland Water Bureau 2026 report explicitly lists Water System ID 4100657.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report