Water quality / WA / Seattle
City water report

Seattle, WA tap water quality.

Seattle Public Utilities met federal limits in the EPA records we checked. This report covers Seattle Public Utilities, which serves about 1,161,961 people using surface water; missing results are labeled rather than inferred.

Water system covered in this report
Seattle Public Utilities
System ID WA5377050
People served
1,161,961
Source water
surface water
Phone
206-684-3000

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
1.6 ppb
Below the 15 ppb action level

Period ending December 2025.

PFAS
Tested
Tested; no sampling-point-average screening flag

No detected PFAS rows in the UCMR 5 records for this system.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile1.6 ppb · Below the 15 ppb action levelDecember 2025EPA Lead & Copper data
PFASNo detected PFAS rows in these system records.UCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

Seattle Public Utilities did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

Trigger: Municipal-water profileCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.

Trigger: Municipal-water profileExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Municipal source and service-area evidence

Seattle drinking water: Cedar and Tolt supply areas are not interchangeable.

These city-specific notes cite municipal records, not new testing of your tap. Confirm the utility named on your bill and the report year. Historical lead samples, PFAS screening and current regulatory compliance are different types of evidence.

Find the actual Cedar or Tolt service area

Seattle Public Utilities identifies the Cedar River and South Fork Tolt River as its two protected watershed sources. The utility's neighborhood analysis places most Seattle residences on Cedar, while Broadview, Bitter Lake, Crown Hill, Northgate, Haller Lake and Pinehurst regularly receive Tolt water; other listed neighborhoods can have mixed service boundaries. A city name or ZIP alone cannot establish today's source or the water conditions at an individual tap. The City publishes its official 2025 annual drinking-water report and 2026 quarterly source analyses.

The 2025 official lead figure matches the federal summary

Seattle's posted 2025 monitoring table gives a 1.6 ppb lead 90th percentile from 52 higher-risk household samples, with zero samples above the historical 15 ppb action level. This corroborates the headline 1.6 ppb value for that monitoring year; it is not an individual home result or a current household plumbing assessment. Seattle identifies home plumbing corrosion as the principal lead exposure mechanism and provides the utility water-quality testing program for follow-up. PFAS UCMR 5 screening remains distinct from regulated annual compliance measurements.

Official sources reviewed November 8, 2026. Original EPA measurements, PWSIDs, provider-to-ZIP matches, legal status, sitemap and index directives were not changed.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

See the utility’s service-area map for coverage beyond this city.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Utility in this reportSeattle Public UtilitiesWA5377050
Reported recipients

Supplies water to

Show all reported recipients (12 more)
Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Seattle, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198053%

Housing age does not confirm lead plumbing.

Owner-occupied homes44%

Tenure is context, not a treatment requirement.

Median rooms per home4

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Seattle, WA

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Seattle water.

Which water utility serves Seattle?

The water system covered in this report is Seattle Public Utilities (system ID WA5377050), serving about 1,161,961 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Seattle?

The latest 90th-percentile result in this dataset is 1.6 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Seattle?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility water-quality source

Seattle Public Utilities publishes the 2025 Drinking Water Quality Report.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report