Water quality / AZ / Phoenix
City water report

Phoenix, AZ tap water quality.

City of Phoenix met federal limits in the EPA records we checked. This report covers City of Phoenix, which serves about 1,695,000 people using surface water; missing results are labeled rather than inferred.

Water system covered in this report
City of Phoenix
System ID AZ0407025
People served
1,695,000
Source water
surface water
Phone
602-262-6251

Your results at a glance.

Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.

Health violations · 5 years
0
No health-based flag found

Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.

Lead · 90th percentile
2.7 ppb
Below the 15 ppb action level

Period ending December 2024.

PFAS
Tested
Tested; no sampling-point-average screening flag

EPA UCMR 5 testing is present in the water-system records; PFOA is the strongest summarized PFAS result and no screening flag was triggered. See the utility’s report for detailed sampling results.

Hardness
Not reported
No measured value available

Hardness is not estimated from location.

The results, with context.

Each row identifies the result, its data period and its source. Missing measurements are not estimated.

ResultFinding / comparisonDate / periodSource
Health-based violationsNo health-based limit-exceedance flag in these water-system records.Since Oct. 2021EPA drinking-water data
Lead · 90th percentile2.7 ppb · Below the 15 ppb action levelDecember 2024EPA Lead & Copper data
PFASTested in UCMR 5; summarized city-index result includes PFOA, with no screening flag. See the utility’s report for detailed sampling results.UCMR 5 survey periodEPA UCMR 5
HardnessNot reported. Hardness is not estimated from location.Not reportedA utility report or water test is needed for a measured value.
General information, not a health or plumbing recommendation. EPA and utility records can update after this snapshot.
What this means for your home

Use the public-water result as a starting point.

City of Phoenix did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.

Next step

Add your home details.

Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.

Systems that fit this kind of water.

These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Best match

Aquasana HealthShield WH-HS

Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

Trigger: Municipal-water profileCertified exact-system reduction claims5.7 GPM certified/service flowWaterScore 93 / 100
View system research →
iSpring WGB22B-PFKS PFAS + Heavy Metals
Also consider

iSpring WGB22B-PFKS PFAS + Heavy Metals

Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.

Trigger: Municipal-water profileExact-model PFAS product data verifiedUp to 15 GPMWaterScore 94 / 100
View system research →

Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.

Original Arizona regulator and city utility evidence

Phoenix: original 2022–2024 lead samples and changed municipal service zones.

Public water system: AZ0407025. Confirm your water bill and address-specific service area before applying systemwide data. Lead 90th-percentile results are not individual household tests; UCMR 5 PFAS survey findings are not legal compliance determinations.

The regulator confirms the original lead precision and sample count

ADEQ identifies Phoenix City of as active public system AZ0407025. For the January 2022–December 2024 monitoring period, its lead summary reports 56 tap samples, a 90th percentile of 0.00274 mg/L (2.74 ppb), and two individual samples over the then-applicable 15 ppb action level. FilterTier's displayed 2.7 ppb is a rounded version of the system-level statistic. Two individual high results do not mean that the systemwide 90th percentile exceeded the action level, nor do they identify a particular home's water.

Former Phoenix-Anthem and Hedgepeth reporting areas changed

Phoenix's official report archive says the separate Phoenix-Anthem system was deactivated in August 2022 and the Phoenix-Hedgepeth system was deactivated in fall 2024, with those users connected to the main Phoenix public water system. Do not use an old system's report as the current result for those connected properties. Phoenix's published lead-service-line inventory is searchable by address; an unknown line material is not a lab detection and finding no lead lines in its past inspections is not proof that all private plumbing is lead-free. Confirm the utility on the current bill and the city's service-line lookup.

Primary Arizona ADEQ and municipal source context reviewed November 8, 2026. Original federal numeric datasets, PWS joins, ZIP attribution, violation status, sitemap and indexation policy are unchanged.

Beyond the city boundary

Areas served & connected communities.

A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.

Service-area matches

Communities in this utility’s mapped area

Same reported system ID

Other city reports for this utility

A shared system ID connects the reports, but does not mean every tap has identical water quality.

Sources: EPA service-area boundaries. Maps can be approximate and are not a guarantee of service at an address.
Water supply relationships

Where the utility fits in the supply network.

Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.

Utility in this reportCity of PhoenixAZ0407025
Reported recipients

Supplies water to

Source: EPA SDWA utility relationship data. Verify current arrangements with the utilities.
City-level context, not a home test

What local housing can—and cannot—tell you.

Housing estimates describe Phoenix, not the materials, water quality or plumbing demand of your individual home.

Homes built before 198042%

Housing age does not confirm lead plumbing.

Owner-occupied homes57%

Tenure is context, not a treatment requirement.

Median rooms per home5.1

Room count does not determine peak flow.

Source: 2020–2024 ACS five-year estimates. These are population estimates, not property-level measurements. Check your service-line materials and actual simultaneous fixtures rather than choosing treatment from city averages.

Live air-quality map · Phoenix, AZ

Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.

Open the live AirNow map ↗

For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.

Questions about Phoenix water.

Which water utility serves Phoenix?

The water system covered in this report is City of Phoenix (system ID AZ0407025), serving about 1,695,000 people. If your bill shows another utility, use the ZIP report to confirm your system.

Was lead reported for Phoenix?

The latest 90th-percentile result in this dataset is 2.7 ppb for the period ending December 2024. Lead can also come from building plumbing, so utility results do not describe every tap.

What does the PFAS result mean?

PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.

Do I need a whole-house filter?

Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.

Does one utility serve every address in Phoenix?

Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.

Sources and update date.

EPA drinking-water database

Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.

EPA UCMR 5

National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.

About this water system

Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.

Official utility / regulatory source

Official City of Phoenix page publishes the 2025 report for the primary Phoenix public water system and lists the water-services contact.

Not your city?

Check your ZIP code.

Find the public water systems mapped to your ZIP and choose the one on your bill.

See my water report