Hardness is not estimated from location.
Tempe, AZ tap water quality.
At least one sampling point averaged above an EPA PFAS limit in EPA's national PFAS survey. This is a screening result, not a violation. The strongest city-index PFAS flag is PFOS, at 13.8× the screening comparison. EPA evaluates PFAS compliance using running annual averages, so FilterTier labels this a screening result rather than a violation.
Your results at a glance.
Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.
Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.
Period ending December 2024.
Detected examples: PFHxS, PFOS, PFOA, PFBS….
The results, with context.
Each row identifies the result, its data period and its source. Missing measurements are not estimated.
| Result | Finding / comparison | Date / period | Source |
|---|---|---|---|
| Health-based violations | No health-based limit-exceedance flag in these water-system records. | Since Oct. 2021 | EPA drinking-water data |
| Lead · 90th percentile | 4.4 ppb · Below the 15 ppb action level | December 2024 | EPA Lead & Copper data |
| PFHxS | Highest single sample 70.5 ng/L · EPA MCL 10 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFOS | Highest single sample 55.8 ng/L · EPA MCL 4 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFOA | Highest single sample 38.7 ng/L · EPA MCL 4 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFBS | Highest single sample 25.7 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFHxA | Highest single sample 22.5 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFPeA | Highest single sample 14.4 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFBA | Highest single sample 9.9 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFPeS | Highest single sample 8 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFHpA | Highest single sample 7 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| Lithium | Highest reported UCMR 5 result: 278 µg/L · monitoring result, not presented as a violation | UCMR 5 survey period | EPA UCMR 5 |
| Hardness | Not reported. Hardness is not estimated from location. | Not reported | A utility report or water test is needed for a measured value. |
Use the public-water result as a starting point.
PFAS is the main screening flag in this report. At least one sampling point averaged above the comparison level used for PFOS in EPA's national survey. EPA evaluates compliance using annual averages, so FilterTier does not call this a violation. If PFAS is your priority, favor exact-system certification and then check whether the certified flow can support your home.
Add your home details.
Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.
Systems that fit this kind of water.
These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Matched because this city report has a PFAS screening flag and this is the current #1 PFAS-ranked exact system with documented reduction evidence.

iSpring WGB22B-PFKS PFAS + Heavy Metals
Current #2 PFAS-ranked system. Its exact-model PFAS product specifications and flow are verified; confirm the certification evidence that matters to your goal before buying.
Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.
Tempe: read the 2025 PFAS source-level ranges alongside official annual reports.
Displayed public water system: AZ0407100. A provider's sampling statistic is not a test of a specific household. Match the water bill and original report before applying results to your address.
Tempe distinguishes 2025 PFAS measurements from enforceable compliance
Tempe publishes a table of 2025 PFAS sampling from water sources used that year, with compound-by-compound averages and observed ranges. A detected source sample, a non-detect average, an EPA UCMR 5 screening observation and a future compliance determination are not interchangeable. The municipality also describes quarterly PFAS monitoring and planned treatment preparations: a proposed treatment is not proof of installation or operation. Do not apply a sample maximum to every Tempe home or label a source-level result a violation without a matching dated regulatory finding.
Match the current CCR and any notice to the actual city water account
Tempe provides annual water-quality reports, water-source information, a municipal question form and local utility contact. This page identifies the City of Tempe system AZ0407100, but its EPA 2024-period lead 90th percentile and PFAS survey screening do not constitute a November 2026 tap test. Confirm the actual utility for the address, original monitoring year, test versus detection, current federal and state legal status, and any source/well operational change from the primary report.
Original agency and city sources reviewed November 8, 2026. Historical values and partial-period records are identified explicitly. No underlying laboratory result, PWS assignment, indexing policy or compliance-status field was changed.
Areas served & connected communities.
A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.
Communities in this utility’s mapped area
- Guadalupe
Other city reports for this utility
A shared system ID connects the reports, but does not mean every tap has identical water quality.
See the utility’s service-area map for coverage beyond this city.
Where the utility fits in the supply network.
Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.
Water supplied by
Supplies water to
- Phoenix
- Chandler
What local housing can—and cannot—tell you.
Housing estimates describe Tempe, not the materials, water quality or plumbing demand of your individual home.
Housing age does not confirm lead plumbing.
Tenure is context, not a treatment requirement.
Room count does not determine peak flow.
Live air-quality map · Tempe, AZ
Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.
Open the live AirNow map ↗For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.
Questions about Tempe water.
Which water utility serves Tempe?
The water system covered in this report is City of Tempe (system ID AZ0407100), serving about 165,000 people. If your bill shows another utility, use the ZIP report to confirm your system.
Was lead reported for Tempe?
The latest 90th-percentile result in this dataset is 4.4 ppb for the period ending December 2024. Lead can also come from building plumbing, so utility results do not describe every tap.
What does the PFAS result mean?
At least one sampling point averaged above the screening comparison used by FilterTier for PFOS. EPA evaluates compliance using annual averages; this city-page result is a screening flag, not a violation.
Do I need a whole-house filter?
Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.
Does one utility serve every address in Tempe?
Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.
Sources and update date.
EPA drinking-water database
Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.
EPA UCMR 5
National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.
About this water system
Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.
Official utility / regulatory source
Official City of Tempe publishes annual Water Quality Reports; Arizona Drinking Water Watch identifies AZ0407100 as TEMPE CITY OF.
Related water reports.
Check your ZIP code.
Find the public water systems mapped to your ZIP and choose the one on your bill.
