Start by finding the moisture source. A dehumidifier can remove moisture from air, but it does not repair a leaking pipe, failed drainage or water entering through the building. A musty smell is a reason to investigate; it does not identify the source or extent of a problem by itself.
Make a useful observation record
Note when the smell appears: after rain, during laundry, in warm weather or throughout the year. Record room humidity and temperature, photograph visible wet areas, and mark which wall or floor area is affected. Keep observations separate from guesses about the cause. This record helps you explain the problem when arranging a repair or assessment.
Check water entry and condensation
EPA’s moisture-prevention guidance highlights plumbing leaks, foundation drainage, condensation, HVAC drain pans and appliances that release moisture. Check accessible areas without opening contaminated cavities. Keep gutters and drainage maintained, vent clothes dryers outdoors and repair identified leaks. Warm, humid outdoor air can worsen a cool space’s moisture problem, so opening windows is not a universal fix.
What humidity reading matters?
EPA’s home mold guide recommends keeping relative humidity below 60%, ideally 30–50% where possible. Measure it with a humidity meter. Also inspect surfaces: a satisfactory reading in one location does not prove a hidden leak has stopped.
Wet materials should be dried within 24–48 hours where possible to reduce the chance of mold growth. Existing mold requires appropriate cleanup along with fixing the water problem. A lower dehumidifier setting alone does not remove contamination from materials.
When a dehumidifier can help
ENERGY STAR’s buying guidance bases portable dehumidifier capacity on both space size and dampness. Check the operating-temperature range for a cool basement. Decide how collected water will leave: a bucket that needs emptying, a suitable gravity drain or a pump arrangement. Keep drainage away from electrical connections and follow the installation manual.
Portable and installed whole-home systems are different purchases. For installed equipment, ask the contractor to explain sizing, air distribution, drainage, controls and service access. Compare the complete installation plan rather than equipment price alone.
When to bring in a professional
EPA recommends professional help for contaminated water such as sewage and additional evaluation for substantial water damage or mold covering more than about 10 square feet. Suspected HVAC contamination also needs particular care; EPA advises against operating a system known or suspected to be mold-contaminated. Do not disturb hidden growth simply to identify it. Follow the full EPA cleanup guidance for your situation.
Questions to ask before paying for equipment
- What evidence identifies the moisture source?
- Which repair addresses it, and how will we check the result?
- What room temperature and humidity were used for sizing?
- How will condensate drain safely?
- What maintenance and follow-up inspection are included?
For equipment research after the moisture assessment, see our whole-home dehumidifier comparison. If the issue is dry air rather than dampness, read the indoor humidity guide.
Sources reviewed October 30, 2026. This guide is an investigation starting point, not a mold inspection or remediation plan.