Hardness is not estimated from location.
Riverside, CA tap water quality.
City of Riverside Public Utilities met federal limits in the EPA records we checked. This report covers City of Riverside Public Utilities, which serves about 298,398 people using groundwater; missing results are labeled rather than inferred.
Your results at a glance.
Same four checks on every city page, always in the same order. Missing values are labeled, never guessed.
Health-based limit-exceedance records since Oct. 2021; resolved or archived records are not presented as current.
Period ending December 2025.
Detected examples: PFPeA, PFHxA, PFOS.
The results, with context.
Each row identifies the result, its data period and its source. Missing measurements are not estimated.
| Result | Finding / comparison | Date / period | Source |
|---|---|---|---|
| Health-based violations | No health-based limit-exceedance flag in these water-system records. | Since Oct. 2021 | EPA drinking-water data |
| Lead · 90th percentile | 1 ppb · Below the 15 ppb action level | December 2025 | EPA Lead & Copper data |
| PFPeA | Highest single sample 6.7 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFHxA | Highest single sample 4.1 ng/L · No individual federal MCL shown for this compound Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| PFOS | Highest single sample 4 ng/L · EPA MCL 4 ng/L Single-sample values are context only; EPA PFAS compliance is based on running annual averages. | UCMR 5 survey period | EPA UCMR 5 |
| Lithium | Highest reported UCMR 5 result: 9.1 µg/L · monitoring result, not presented as a violation | UCMR 5 survey period | EPA UCMR 5 |
| Hardness | Not reported. Hardness is not estimated from location. | Not reported | A utility report or water test is needed for a measured value. |
Use the public-water result as a starting point.
City of Riverside Public Utilities did not trigger the lead or PFAS screening rules used for the headline. That does not mean every possible contaminant was tested or absent. For city water, treatment decisions can still depend on taste, disinfectant, plumbing, hardness and your own goals. The finder uses this report as a starting point, then asks about household flow and budget.
Add your home details.
Flow demand, plumbing, maintenance and budget can change which treatment fits even when two homes share the same utility.
Systems that fit this kind of water.
These are rule-based matches from the current FilterTier rankings. Size still depends on your home.

Aquasana HealthShield WH-HS
Current #1 on the city-water ranking. Exact-system health-effect reduction evidence is strong, but its 5.7 GPM certified/service flow makes household sizing important.

iSpring WGB22B-PFKS PFAS + Heavy Metals
Current #2 on the city-water ranking. It offers much higher published flow, with verified exact-model PFAS/heavy-metal product data; confirm the exact certification evidence that matters to your goal.
Ranking updates can change these matches. Evidence label and flow are shown so the tradeoff stays visible.
Riverside's own water-quality report adds measured hardness, dated lead testing and PFAS context.
This page's public-water-system record is Riverside Public Utilities, CA3310031. California's drinking-water regulator identifies that active system. The city's original 2025 Water Quality Report describes supply from the Bunker Hill and Riverside groundwater basins. Its data are for the utility's named supply and reporting periods — not a laboratory test at your home. Verify that this system appears on your water bill; a Riverside mailing address alone does not establish your retail water provider.
2025 lead: non-detect at the 90th percentile, not guaranteed zero
Riverside reports 51 household tap samples in 2025, a non-detected (ND) lead 90th percentile and 0 of 51 samples above the then-applicable 15 ppb action level. The original report does not establish that every home's tap is lead-free, and an analytical ND must not be turned into a numeric zero without a validated detection threshold. The utility also warns that privately owned older plumbing/service lines can differ from public mains; check its service-line inventory and consider a home tap test.
Measured total hardness: 197 ppm as CaCO3
In its 2025 secondary/aesthetic results table, Riverside gives 197 mg/L (ppm) as CaCO3 average, a 180–210 mg/L observed range, and approximately 12 grains per gallon. This is a local utility-system result useful for understanding scale and possible softening — not a universal hardness number for every residence or a health-limit violation.
2023 UCMR5 is screening, not today's PFAS enforcement
The city's CCR separately labels 2023 UCMR5 results: PFHxA 3.6 ppt average (ND–4.3), PFPeA 6.3 ppt average (5.6–8.7), and PFBA reported ND (ND–5.6). These were unregulated occurrence samples in a different year from the 2025 lead/hardness data. They do not independently establish a 2026 MCL violation, the latest treated-water sample, or the water quality at your tap. Check updated regulator results and sampling-point compliance separately.
- California drinking-water regulator: Riverside system CA3310031
- Riverside Public Utilities original 2025 Water Quality Report (sampling table and lead guidance)
- Riverside Public Utilities lead awareness and service-line map
- Riverside source water, consumer report and utility contacts
Original municipal 2025 CCR table visually reviewed November 9, 2026. Lead reported as ND with no verified laboratory quantitation threshold; PFAS values are specifically 2023 UCMR5, in ng/L (numerically ppt), not 2025 lead or an adjudicated November 2026 violation. Service address/ZIP boundaries, formal current case status and household plumbing remain to be verified. No underlying federal measurements or technical indexing changed.
Areas served & connected communities.
A utility service area is not the same as a city boundary. Service-area maps can be approximate; confirm your provider on your bill.
Communities in this utility’s mapped area
- Home Gardens
Other city reports for this utility
A shared system ID connects the reports, but does not mean every tap has identical water quality.
See the utility’s service-area map for coverage beyond this city.
Where the utility fits in the supply network.
Reported wholesale relationships may be seasonal, backup or partial supplies. They do not establish today’s water blend, treatment or an identical contaminant profile.
Water supplied by
- Western Mwd
Supplies water to
- Western Mwd
- Norco
- Riverside Highland Water Company
- Home Gardens County Wd
What local housing can—and cannot—tell you.
Housing estimates describe Riverside, not the materials, water quality or plumbing demand of your individual home.
Housing age does not confirm lead plumbing.
Tenure is context, not a treatment requirement.
Room count does not determine peak flow.
Live air-quality map · Riverside, CA
Explore the latest available outdoor air readings from AirNow. Credit: U.S. EPA AirNow and participating state, local and tribal air agencies. Live observations are preliminary and may change after quality assurance; they are not regulatory compliance determinations. Observation times are shown in the map. Missing readings do not mean clean air.
Open the live AirNow map ↗For validated regulatory air-quality data and trend analysis, use EPA AirData/AQS.
Questions about Riverside water.
Which water utility serves Riverside?
The water system covered in this report is City of Riverside Public Utilities (system ID CA3310031), serving about 298,398 people. If your bill shows another utility, use the ZIP report to confirm your system.
Was lead reported for Riverside?
The latest 90th-percentile result in this dataset is 1 ppb for the period ending December 2025. Lead can also come from building plumbing, so utility results do not describe every tap.
What does the PFAS result mean?
PFAS was included in the national survey data used here and no sampling-point average in the city index triggered the screening flag.
Do I need a whole-house filter?
Not automatically. The right treatment depends on the exact contaminants, your plumbing, household flow, maintenance preference and budget. Use the finder to combine this public-water profile with your home details.
Does one utility serve every address in Riverside?
Service boundaries can cross city limits, and a city may have more than one provider. Match the utility and system ID to your water bill before applying a public-water result to your address. Private wells need their own testing.
Sources and update date.
EPA drinking-water database
Utility identity, system ID, source-water context, violations and Lead & Copper results. For lead, the 15 ppb action level remains the applicable transition-period threshold until LCRI compliance begins November 1, 2027; FilterTier uses 10 ppb as a screening flag on these city pages.
EPA UCMR 5
National PFAS survey data used for the city screening rule. Survey data does not by itself establish MCL compliance. As of October 2026, PFOA/PFOS MCLs remain in force; EPA has separately proposed an optional compliance extension and proposed rescinding the PFHxS, PFNA, HFPO-DA and hazard-index provisions.
About this water system
Match the provider and system ID to your water bill. Data snapshot: EPA SDWA 2026Q2 / UCMR 5 August 2026 final.
Official utility / regulatory source
Official Riverside Public Utilities lists its 2025 Water Quality Annual Report; reviewed California PWSID CA3310031 is retained.
Related water reports.
Check your ZIP code.
Find the public water systems mapped to your ZIP and choose the one on your bill.
